446108
57
Zoom out
Zoom in
Previous page
1/72
Next page
XD-SERIES (EN/M,T)
Application section
57
4
Select the delay time.
5
Adjust the volume balance.
6
Press the ENTER key.
When adjusting the center speaker and surround
speaker volume levels :
1 “Test L” (Left)
2 “Test C” (Center)
3 “Test R” (Right)
4 “Test S” (Surround)
The display and test tone output speaker are
switched automatically.
To increase
To decrease
÷ Be sure to adjust from your listening position.
÷ The volume level can be adjusted in steps of 1 dB.
÷ The volume levels can be adjusted in the range from –10
dB to +10 dB.
÷ The set center level value will be stored as the common
setting for “Dolby Pro logic” and “Dolby 3 stereo”.
The following items can be selected by turning the
MULTI CONTROL jog dial.
“20ms” ...
When the listening position is located be-
tween the front and surround speakers
“30ms” ... When the listening position is closer to the
surround speakers
“15ms” ... When the listening position is closer to the
front speakers
Delay time
This refers to the difference in timing of the sound output from the surround speakers with respect to that output
from the front speakers. The delay time setting consists of adjusting this difference in time.
Effective sound adjustment
20mSlelect de s
+Scrolled display (Select delay time)
+Scrolled display (Select Channel Level)
TesSaelect Ch t L
C -ch +8
4
2
¢
3
MULTI CONTROL
SELECT
4
2
¢
3
MULTI CONTROL
ENTER
SELECT
1 Press the MULTI CONTROL key while
“Test C” or “Test S” is displayed.
2 Adjust the surround speaker volumes
equal to the volume of the test tone from
the left and right front speakers.
3 After completing the volumes from all
the speakers, press the SELECT key.
To start surround play, select surround playback with
the LISTEN MODE key or SOUND CONTROL jog dial.
E
Display for the center speaker volume adjust-
ment :
Display for the surround speaker volume adjust-
ment :
S -ch +8
÷ After completion of the settings, the set contents will be
displayed by scrolling.
(Center speaker setting = Surround speaker setting =
Delay time setting= “Press 'ENTER' to Save”)
÷ When the center speaker and/or surround speakers are
set to “No” in the “Surround setting” procedure steps
2 and/or 3, the display and test tone output of the
speakers are not provided.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood xd-772s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood xd-772s in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info