157475
34
Zoom out
Zoom in
Previous page
1/76
Next page
XD-8550/XD-6000 (En/T)
34
Preparation sectionBasic sectionApplication sectionKnowledge sections
Let's record
Adjusting the recording level
Restarting recording
The following procedure allows to re-record sound from the
middle of recording.
The following procedure assumes the presence of a non-
recorded section of 4 seconds before the recording start
position.
1Press the key during recording.
2Return the recording source compo-
nent to the position you want to
restart recording, and put the source
component to pause mode.
3Press the REC/ARM key twice.
4Press the REC/ARM key once.
5Play (Receive) the music to be re-
corded.
÷Recording is stopped, the tape is returned to the recording start
position, and the deck enters stop mode after leaving a non-recorded
section of about 2 seconds after the previous music.
÷If there is no music recorded before the recording start position, the
deck enters stop mode after tape rewinding.
1Perform the procedure of “Record-
ing” until step 4.
¤
2Adjust the recording level.
3To restart recording
÷If the recorded sound is too large or distorted, decrease the recording
level. If it is too low, increase the recording level.
O p π
O p π
O p π
O p π
O p π
LEVEL
ADJUST
REC / ARM
REC / ARM
REC / ARM
When the tape is
moving 3 way.
When the tape is
moving 2 way.
The adjustment range is
between -2 ~ +2.
Blinks.
8
PAUSE
REC / ARM
REC / ARM
÷The deck enters record-pause mode after leaving a non-recorded
section of about 4 seconds.
÷In case recording is restarted from the beginning of a tape, feed the
leader tape (the non-recordable section at the beginning of each side of
tape) manually before starting recording.
÷When recording a CD, the CD playback and tape recording can be
started simultaneously by pressing the CD play (6) key in step 4.
In a few sec., REC/ARM and
PAUSE keys light up.
Lights
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood xd 6000 xh at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood xd 6000 xh in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info