157417

Kenwood xd 552 Manual

33
Zoom out
Zoom in
Previous page
1/64
Next page
XD-SERIES (En)
Application section
33
Playback of CD
1 Select “CD Program Play”.
2 Press the MENU key.
4
Check the programmed tracks
(and replace, add or delete tracks as
required).
To check:
÷ The blinking item can be replaced.
To replace a track in the program:
÷ The added track number is added to the end of the
existing program.
÷ The programmed tracks are displayed in sequence.
÷ Turn the MULTI CONTROL jog dial during program
playback to stop to the previous or next programmed
track.
÷ When the jog dial is rotated a little in the direction of
counterclockwise once during playback, the track
being played will be played from the beginning.
÷ To check (modify, add or delete) the programmed
tracks after playback, perform the operations in steps
2 and 4.
5
Enter it.
÷ If the key is pressed during playback, normal playback in
order of tracks resumes from the current track.
÷ The program mode can also be canceled by pressing
the 0 OPEN key.
1 Select the programmed disc
or track to be replaced and
press the SELECT key.
2 Select a disc or track to re-
place the disc or track selected
above (step 3-1and 2).
1 Select the display as shown
on the right and press the
SELECT key.
2 Perform the same operations
as in step 3-1and 2.
To add a track to the program:
To delete a track from the program:
1 Select the programmed disc
or track to be cleared and
press the SELECT key.
2 Select “clear” and press the
SELECT key.
Goes off
M
U
L
T
I
C
O
N
T
R
O
L
ENTER
SELECT
M
U
L
T
I
C
O
N
T
R
O
L
SELECT
M
U
L
T
I
C
O
N
T
R
O
L
SELECT
M
U
L
T
I
C
O
N
T
R
O
L
To quit the program mode
MENU
P201 D1 T0
P412 D3 T0
P412 D3 T0
P?13 D? T?
P412 D3 T0 P12 clear
Display when 12 tracks have been programmed
MENU
SELECT
M
U
L
T
I
C
O
N
T
R
O
L
Press the TIME key on the remote control unit to switch
the time display.
(Playback starts from the first programmed
track (program No. 1))
… 33 …


Need help? Post your question in this forum.

Forumrules
1

Forum

kenwood-xd-552

Reset search

  • Kenwood is flashing between standby and timer. Says speakers may have a short circuit but I dont know how to fix this. Any suggestions? Submitted on 6-3-2022 at 13:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood xd 552 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood xd 552 in the language / languages: English as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info