157479
15
Zoom out
Zoom in
Previous page
1/40
Next page
15
To interrupt playback :
1 Press the 8 button on the remote control.
•“8” will light up.
2 Press the 3 button to resume playback from the
same point.
To stop playback :
Press the 7 STOP button.
To remove the CDs :
Whilst in the stop mode, press the 0 OPEN/CLOSE
button.
The disc tray will open. Remove the two discs.
Then, press the DISC SKIP button to rotate the
disc tray and remove the remaining disc.
After use :
Press the ON/STANDBY button to enter the
standby mode.
Cautions :
Do not carry the unit with discs left in the disc
trays. The disc may become loose inside the
unit and they may be damaged or cause dam-
age to the unit. This may also cause malfunc-
tions.
Do not place two CDs in one disc position.
Do not push the disc tray whilst it is moving.
Do not attempt to turn the disc tray by hand.
This may cause malfunctions.
If the power fails whilst the tray is open, wait
until the power is restored.
If the disc tray is stopped forcibly, “ERR” will
appear in the display and the unit will not func-
tion.
If this occurs, press the ON/STANBY
button to enter the standby mode and then turn
the power on again.
If TV or radio interference occurs during CD
operation, move the unit away from the TV or
radio.
If a disc is damaged, dirt, or loaded upside
down, the disc will be skipped and the next
disc will automatically play.
Disc number selection
1
When stopped, press the DISC SKIP button.
2 Press the 3 button.
The next disc playback will begin, after which
each following disc will be played sequentially.
Notes :
When the DISC SKIP button is pressed during
playback, playback will begin automatically from
the next disc. (It is not necessary to press the 3
button.)
When one of the disc number buttons (DISC 1-
DISC 3) is pressed during playback, playback of
the selected disc will begin automatically. (It is
not necessary to press the 3 button.)
2
DISC 1 - DISC 3
1
1
2
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood xd 355 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood xd 355 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info