162477

Kenwood vz 907 d 1 Manual

38
Zoom out
Zoom in
Previous page
1/44
Next page
Installation for Main Unit
■
Installation for Hideaway Unit
and Video CD Decoder Unit
■
Attach the installation brackets
to the sides of the hideaway unit
using the sems bolts (M4X8mm).
Use the tapping screw
(ø4X16mm) to secure the
hideaway unit to the audio board.
2
1
● Securing to audio board
● Securing to pile carpet
Peel the protective strips off of the velcro strips, attach them to the
bottom of the hideaway unit, and secure to the pile carpet.
Please do not install the unit near the
dashboard, the rear tray, or other
important components. Doing so could
lead to injury or accident should the unit
come off due to a shock and strike a
person or an important component.
Tapping screws should be used for
mounting. (Attachment with velcro
strips, although easy, can come off with
a shock.)
CAUTION
Sems bolts
(M4X8mm)
(Accessoryu)
Tapping screw
(ø4X16mm)
(Accessoryi)
Installation
brackets
(Accessoryy)
Velcro strips
(Accessoryo)
Installation
Make sure that the unit is installed securely in place. If the unit is
unstable, it may malfunction (for example, the sound may skip).
NOTE
Self-tapping screw
(commercially
available)
Firewall or metal support
Metal
mounting strap
(Accessory!3)
Bend the tabs of the
mounting sleeve with
a screwdriver or
similar utensil and
attach it in place.
6 mm
MAX.
φ5mm
φ5mm
6 mm
MAX.
Installing in Japanese-Made Cars
■
N: Nissan cars
T: Toyota cars
T
N
N
T
T/N
Accessory!0 ...for Nissan car
Accessory!1...for Toyota car
• During installation, do not use any screws except for those
provided. The use of different screws might result in damage to
the main unit.
• Damage may occur if a screwdriver or similar tool is used with
excessive force during the installations.
CAUTION
Refer to the section “Removing the hard rubber frame (P.41)” and
then remove the hard rubber frame.
Align the holes in the unit (two locations on each side) with the
vehicle mounting blacket and secure the unit with the accessory
screws.
2
1
!0
!1
Accessory!2
38
English
Installation
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood vz 907 d 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood vz 907 d 1 in the language / languages: English as an attachment in your email.

The manual is 3,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info