510822
35
Zoom out
Zoom in
Previous page
1/40
Next page
35
EN
In case of difficulty
Amplifier
Symptom
Resetting the Microcomputer
The microcomputer may malfunction (unit cannot be operated, or
shows an erroneous display) if the power cord is unplugged while
the power is ON, or due to some other external factor. If this
happens, execute the following procedure to reset the microcom-
puter and return the unit to its normal operating condition.
Unplug the power cord from the wall outlet, then plug it back in
while holding down the ON/STANDBY
key.
÷ Please note that resetting the microcomputer will clear the contents
of the memory and returns the unit to the state it was in when it left
the factory.
Remedy
No sound from the speakers.
Sound is not output from the speaker,
or their sound is very small.
The standby indicator blinks and sound
is not output.
Audio cannot be recorded.
A video source cannot be recorded
normally.
When playing a digital source signal,
the sound is cut off soon after it starts.
Dolby Digital or DTS audio software
cannot be played in multi-channel
audio.
The input for the unit is set automatically
to "GAME" when the unit is turned ON.
÷ Connect them properly referring to "Connecting the speakers". 0
÷ If muting is ON, release it.
÷ If headphones are connected, disconnect them.
÷ Press the INPUT MODE key to select to full auto mode. 7
÷ Connect them properly referring to "Connecting the speakers". 0
÷ See "Speaker settings" and check if the setting for all of the speakers is correct. ^
÷ Select a surround mode.
÷ Adjust the speaker levels using the test tone. *
÷ Speaker cords are short-circuited. Disconnect the power cord from the AC wall outlet, switch
the receiver OFF, remove the short-circuiting and turn the receiver ON again.
÷ Connect the equipment correctly by referring to "Connecting video components, audio
components" and "Digital connections". 9
÷ If it is the digital audio that you attempt to record, set up the unit correctly by referring to
"Recording music in REC mode". £
÷ Copy-guarded video software cannot be recorded.
÷ There are many possible causes for this problem, depending on the type of player used.
Switch the input mode to DIGITAL MANUAL during playback of the digital source, and restart the
playback from the beginning. 7
÷ Check if the digital output setting of the digital audio player is correct.
÷ The GAME mode function is activated. )
÷ Connect an antenna properly. #
÷ Set the broadcast band properly.
÷ Tune the frequency of the desired station. ¢
÷ Install the outdoor antenna away from the road.
÷ Turn off the power to the appliance.
÷ Install the receiver farther away from the TV.
÷ Preset a station with a receivable frequency.
Radio stations cannot be received.
Interference.
A station which was preset cannot be
received by pressing the corresponding
numeric key.
Tuner
Symptom Remedy
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood VRS6200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood VRS6200 in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood VRS6200

Kenwood VRS6200 User Manual - German - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info