510822
16
Zoom out
Zoom in
Previous page
1/40
Next page
16
EN
Preparing for playback
RECEIVER
SETUP
ON/STANDBY MULTI CONTROL @/#
SOUND (
SETUP
SOUND (
TUNER, VIDEO, AUX,
GAME/F.AUX
MULTI CONTROL %/
Speaker settings
To enable you to obtain optimum enjoyment from the receivers listening
modes, make sure to complete the speaker settings (Subwoofer, Front,
Center, Surround and Surround Back speakers) as described below.
1
Turn on the power to this receiver by pressing the
ON/STANDBY
key (or RECEIVER key).
2
If you want to use the remote control unit, press the TUNER,
VIDEO, AUX or GAME/F.AUX key on the remote to set it to the
receiver control mode.
3
Initiate the setup mode.
1 Press the SETUP key.
2 Use the MULTI CONTROL button (or the MULTI
CONTROL %/ keys) for the following displays.
1 "SP SETUP"
2 "TEST TONE"
3 "DISTANCE"
4 "LFE LEVEL"
5 "EXIT"
÷ While the main setup display is appeared, the setup mode
can be canceled by selecting "EXIT" and then pressing the
SETUP key.
The flow of the SETUP is as follows;
SP SETUP TEST TONE DISTANCE EXITLFE LEVEL
Front Left
Center
Front Right
Right Surround
HTB 1
HTB 2
HTB 3
Custom
Subwoofer
Front
Center
Surround
Surround
Back
MANUAL
AUTO
L
C
R
RS
LS
RB
LB
SW
L
C
R
RS
RB
LB
LS
SW
Subwoofer
Re-mix
Left Surround
Surround Back Left
Surround Back Right
4
Select a speaker system.
1 Select "SP SETUP" and press the SETUP key again so
that the speaker system indication "SP SYSTEM"
scrolls across the display.
2 Use the MULTI CONTROL button (or the MULTI
CONTROL %/ keys) to select the speaker system
setting.
1 "HTB 1": Select "HTB 1" if you use speaker system KS-2200HT*.
2 "HTB 2": Select "HTB 2" if you use speaker system KS-3200HT*,
KS-5200HT*, KS-7200HT*.
3 "HTB 3": Select "HTB 3" if you use speaker system KS-8200HT*.
4 "CUSTOM": Select to set up the speakers according to
the speaker system in use. (Speaker setup is required
every time after the speaker system is changed.)
* Model availability may differ depending on the country
and sales area.
÷ When the setting "HTB 1", "HTB 2" or "HTB 3" is selected, the
procedure skips to step 5.
÷ When you use a KENWOOD speaker system and select
"HTB 1", "HTB 2" or "HTB 3" set the speaker setup, the audio
will be corrected automatically according to the speaker
characteristics.
÷ When the speaker setting is set to "HTB 1", "HTB 2", "HTB 3 " or
"BS OFF" the DOLBY PRO LOGIC IIx, DTS-ES and DOLBY
DIGITAL EX listen modes cannot be selected.
3 For general speaker setting, use the MULTI CONTROL
button (or the MULTI CONTROL %/ keys) to select
"CUSTOM", and press the SETUP key again.
÷ The subwoofer setting indication "SUBW" appears.
4 Use the MULTI CONTROL button (or the MULTI
CONTROL %/ keys) to select the appropriate
subwoofer setting.
1 "SUBW ON" :
When a subwoofer is connected.
2 "SUBW OFF" :
When no subwoofer is connected.
÷ The initial setting is "SUBW ON".
÷ When "SUBW OFF" is selected and the selection is
established by pressing the SETUP key in step 5 be-
low, the front speakers are set automatically to "FRNT
LRG" and the procedure jumps to step 8.
5 Press the SETUP key to accept the setting.
÷ The front speakers setting indication "FRNT" appears.
Continued to next page
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood VRS6200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood VRS6200 in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood VRS6200

Kenwood VRS6200 User Manual - German - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info