40359
30
Zoom out
Zoom in
Previous page
1/44
Next page
30
EN
Ambience effects
DVD 6-channel playback
Using a DVD player or the like equipped with six (5.1) output channels and
the receiver, you can enjoy surround sound playback.
When you try to play a disc other than Dolby Digital such as DTS CD, no
sound is produced or, noise may be heard. To avoid this situation, make
sure that you connect the component to the receiver’s DVD/6CH INPUT
jacks through a surround processor which can decode the surround
signal you want to listen to.
Connecting a DVD player which can decode the surround signal itself is
also acceptable.
INPUT MODE
DVD/6CH
INPUT MODE
VOLUME
DVD/6CH
VOLUME /
Preparations
Connect your DVD player to the DVD/6CH jacks of the receiver.
Turn on all other components that will be used.
Complete “Preparing for surround sound”. *
1
Press “DVD/6CH” as the input source.
If speaker system B is on when “DVD/6CH” is selected as the input
source, it switches off and speaker system A turns on automati-
cally.
2
Select "6CH INPUT" by pressing the INPUT MODE key.
3
Start playback of the DVD software.
4
Adjust the volume.
It is not possible to adjust the volume level or sound quality (SET
UP, SOUND) of the channels separately when the receiver is in the
DVD/6CH mode. Adjust the volume with the controls of the DVD
player.
For the powered subwoofer, you can adjust the volume of the
subwoofer using the subwoofer’s own volume control.
Convenient functions
MULTI CONTROL
DIMMERSTEREO
SOUND LISTEN MODE
SOUND
LISTEN MODE%/fi
STEREO
Joystick
(MULTI CONTROL5/,
DOWN2 /UP3)
DIMMER
Adjusting the sound
You can make further adjustments to the sound while listening to
playback in the surround mode.
1 Press the SOUND key and then use to the
M
/
?
keys or Joystick
(2/3) until the desired item appears in the display.
Each time you press the
M
/
?
keys or Joystick (2/3), the menu
changes as follows:
Note that some items are not displayed in certain modes.
1 CNTR (Center speaker level adjustment)*
2 SR (Right surround speaker level adjustment)*
3 SB (Surround back speaker level adjustment)*
4 SL (Left surround speaker level adjustment)*
5 SUBW (Subwoofer level adjustment)*
6 INPUT (Input level adjustment - analog mode only) ¡
7 MIDNIGHT
(Midnight mode ON/OFF - Dolby Digital mode only)
8 PANORAMA (Panorama mode
ON/OFF
)**
9 DIMENSION (Dimension adjustment)**
0 CENTER WIDTH (Center width adjustment)**
- CENTER FOCUS (Center focus adjustment)***
= CSII DLY (Rear speaker delay adjustment)***
~ CSII GAIN (Input gain adjustment)***
! TruBass (Trubass adjustment)***
* The adjustment is only temporary for the current input selection.
The value will return automatically to the original setup value
when the power is turned on/off or when the input selection is
changed.
** Pro Logic II Music mode only.
*** CS II mode only.
2 Use the MULTI CONTROL knob or Joystick (5/) to adjust the
setting as desired.
The adjustment item is displayed for approximately 8 seconds.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood VR-6050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood VR-6050 in the language / languages: English as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info