40361
27
Zoom out
Zoom in
Previous page
1/52
Next page
The DTS compatible models can reproduce a CD, DVD, or LD carrytng
the DTS mark.
DOLBY DIGITAL can be used when playing DVD or LD software bearing
the mm mark and DOLBY DIGITAL format digital broadcasts (etc.).
DlGlTAL
DOLBY PRO LOGIC and DOLBY 3 STEREO can be used when playing
wdeo, DVD, or LD software bearing the WIOOL~S~/ mark.
INPUT MODE INPUT SELECTOR
LISTEN MODE
u
W-R0720
W-R0613
Preparations
l
Turn ON related components.
l
Complete “Preparing for surround sound” (speaker settings). -m
l
Use the INPUT SELECTOR to select the component you wish to play
back with surround sound.
l
Use the INPUT MODE key to select the Input mode (analog or digital)
for the source you wish to play back.
-a
l
Noise will be produced when a DTS source IS played by selecting the
analog Input.
a Start ptaymg the v/de0 software.
a Press the LISTfN MODE or LSTN M. key to select the
listemng mode.
The listening mode settings are stored separately for each input. If the
Input mode IS set to digital auto (“AUTO SOUND” lights), the recetver
selects the optimal listening mode automatically based on the type of
Input slgnal and the speaker settings.
Each press of the LISTEN MODE or LSTN M. key switches the
setting as listed below.
The listenmg mode settings are different depending on the type
of mput slgnal.
When the DOLBY DIGiTAL signal is /put:
vhe DOLBY DIGITAL, PROLOGIC, or 3 STEREO indicator lights up.)
0 DOLBY DIGITAL. DOLBY DIGITAL surround
@ PL II MOVIE: PRO LOGIC II surround MOVIE mode
(The PRO LOGIC Indicator lights up.)
@ PL II MUSIC: PRO LOGIC II surround MUSIC mode
(The PRO LOGIC Indicator lights up.)
@ PRO LOGIC: PRO LOGIC II surround PRO LOGIC mode
(The PRO LOGIC Indicator lights up.)
0 3 STEREO:
3-STEREO mode
(The 3 STEREO indicator lights up)
@ STEREO: Normal stereo playback
When you select DOLBY DIGITAL
“DOLBY DIGITAL” will be scrolled from right to left.
swm
~ . . . . . . . . . . . . . . -.. . . . . . . .
ij ii
,, ::
!FE!zF
0 s 0 .,,.. ii !i . . . . . ,.,,. ,.... ..,
When the DTS srgnal is mput:
(The DTS Indicator lights up.)
r
@ DTS: DTS surround
@ STEREO: Normal stereo playback
When the analog signal or the digital signal (except for
DOLBY DIGITAL or DTS signal) is mput:
- 0 PL II MOVIE: PRO LOGIC II surround MOVIE mode
(The PRO LOGIC indicator lights up.)
@I PL II MUSIC: PRO LOGIC II surround MUSIC mode
rhe PRO LOGIC Indicator lights up.)
@ PRO LOGIC: PRO LOGIC II surround PRO LOGIC mode
vhe PRO LOGIC indicator lights up.)
@ 3 STEREO: 3-STEREO mode
(The 3 STEREO Indicator lights up.)
@ CIRCLE SURROUND: CS 5.1 surround
(The CS 5.1 Indicator lights up.)
@ ARENA: DSP Surround ARENA mode.
0 JAZZ CLUB: DSP Surround JAZZ CLUB mode.
@I THEATER: DSP Surround THEATER mode.
@ STADIUM: DSP Surround STADIUM mode.
0 DISCO: DSP Surround DISCO mode.
- 0 STEREO: Normal stereo playback. Sound
IS
produced
from the two front channels only.
l
If Dolby Digital or DTS slgnal having more channels than the
maxlmum number of playback channels available using the
receiver’s current settings IS input, the DOWNMIX indicator on
the front panel lights up and downmIxIng
IS
performed to match
the number of available channels.
q
Adjust the volume.
Notes
l
Depending on thetypeof theslgnalorspeakersettlng,somelistenlng
modes cannot be selected.
l
When playback IS started, the sound may be cut or Interrupted before
the Input source IS confirmed as Dolby Digltal.
l
To enjoy Dolby Digital surround (as well as all the other listening
modes) from a single component, be sure to use a Dolby Digltal
compatible source component. Connect the Dolby Digital compatible
source component’s Dolby Digltal tormat digltal audio signal to one of
the DIGITAL INPUT jacks on the back of the receiver. Connect the
normal audio slgnal correctly to the respective component’s AUDIO
lacks.
-@&-QjJ-@Q-Qg
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood VR-507 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood VR-507 in the language / languages: English as an attachment in your email.

The manual is 7,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info