40361
22
Zoom out
Zoom in
Previous page
1/52
Next page
Press the MUTE key.
To cancel
Blinks
Press the MUTE key agarn so that the “MUTE” Indicator goes off.
l
MUTE ON can also be deactivated by turnrng the volume control
knob.
pnjij _
Use thus function to pass the source material direct to the amplifier,
bypassrng any audio processing.
Press the SOURCE DIRECT key.
l
When
you
press the
LISTEN MODE, SOUND,
or
SET UP
keys,
or switch to another Input source, SOURCE DIRECT playback will
be canceled.
l
If CINEMA EQ. IS switched ON, SOURCE DIRECT key will not be
0 Use the INPUT SELECTOR knob to select a source other than
effective.
“MD/TAPE”
l
If SOURCE DIRECT IS switched ON, CINEMA EQ. function will not
be effective.
To cancel
Q Start playback on the cassette deck connected to the
MONITOR lacks and start recording on the cassette deck or
MD recorder connected to the MDiTAPE jacks.
Press the SOURCE DIRECT key agam.
MD/TAPE + MONITOR recording
l
If SOURCE DIRECT playback was activated while In surround mode,
canceling SOURCE DIRECT playback will reactivate the prevrous
surround mode.
0 Use the INPUT SELECTOR knob to select “MD/TAPE.”
e Start playback on the cassette deck connected to the MD/TAPE
jacks and start recording on the cassette deck or MD recorder
connected to the MONITOR lacks.
0 Press the SPEAKERS A or B key so that the speaker mdica-
tor goes off.
l
To copy tapes usrng a double cassette deck, refer to the
Instruction manual of the double cassette deck.
Make sure the SPEAKERS
Indicators are turned off.
*If you turn off all of the speakers when In surround mode, the
surround mode will be canceled as well, resulting In stereo playback.
8 Connect headphones to the PHONES lack.
MONITOR
INPUT SELECTOR
0 Use the INPUT SELECTOR knob to select the source (other
than “MD/TAPE”) you want to record.
@ Set the cassette deck or MD recorder to record.
Q Start playback, then start recording.
MONITOR + MD/TAPE recording
0 Press the MONITOR key.
~OMTUR function (analog sources only)
You can connect a cassette deck or graphrc equaliz& to the
MONITOR
lacks of the recerver. If a graphrc equalizer IS connected, the
MONITOR
key should be left rn the on position. Alternately, if a cassette deck
equrpped with a 3-head system IS connected to the
MONITOR
jacks,
you will be able to monitor the just-recorded srgnal while makrng
recordings on the cassette deck. By switchrng the
MONITOR
key on
and off, you can compare the sound of the source srgnal and the just-
recorded srgnal. For more Information, refer to the Instruction manual of
the connected component.
0 Use the VOLUME CONTROL knob or VOLUME keys to adjust
the volume.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood VR-507 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood VR-507 in the language / languages: English as an attachment in your email.

The manual is 7,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info