159526
53
Zoom out
Zoom in
Previous page
1/68
Next page
XD-951/A900/A700 (En)
53
Preparation section Basic section Application section Knowledge sections
Adjust the volume balance.
Activate the DOLBY 3 STEREO mode.
To increase
1Generate the test tone.
2Adjust the center speaker volume
with the main speaker volume.
3Stop the test tone.
÷ Be sure to adjust from your listening position.
÷The speaker volumes are to be adjusted while listening to the test tone.
÷The test tone which is heard like noise moves between speakers at an
interval of 1.5 sec.
÷ The center level can be adjusted in steps of 1 dB.
÷ The volume levels can be adjusted in the range from -10 dB to +10 dB.
÷ The center level value is memorized as a common setting with DOLBY
PRO LOGIC surround.
This mode improves the positioning of the acoustic image of words, etc., by applying directivity enhancer processing and
using an additional center speaker when a video software program recorded with ordinary 2-channel stereo is played.
DOLBY 3 STEREO adjustment
1
2
To decrease
2Select the DOLBY 3 STEREO mode.
(Go to next step within 15 sec.)
3Select the center speaker mode.
÷If you cannot tell whether your center speaker is compact or medium-
sized, try two modes and select according to your liking.
Effective Sound Adjustment
CENTER
TEST TONE
TEST TONE
NORMAL ............. When the center speaker is compact-sized
speaker.
WIDEBAND .........When the center speaker is medium- or
large-sized speaker.
RETURN ...............Returns to step 2.
DOLBY PRO LOGIC
DOLBY 3 STEREO
STEREO
DSP
The display and test tone output speaker are switched auto-
matically.
TEST L (Left)
TEST C (Center)
TEST R (Right)
+
5
H
C
-
C
L
T
S
E
T
1Perform the same operations as step 1 and 2 of the
procedure for “Setting using the remote control unit”
of “DOLBY PRO LOGIC surround adjustment”.
Q
Center level display
12
ENTER
1
2
SET
Adjust the volume.
Play a video software program.
Activate the DOLBY 3 STEREO mode.
DOLBY 3 STEREO play
Before playing a video (or LD) software program carrying the mark, be sure to complete the “DOLBY 3
STEREO adjustment”.
To cancel DOLBY 3 STEREO play
1
2
3
Press the DOLBY 3 STEREO key of the remote control
unit.
Use the VOLUME keys of the remote control unit.
Press the STEREO key of the remote control unit.
A
L
M
R
O
N
Y
3
s
T
B
L
O
D
| Scrolled display (DOLBY 3 STEREO)
| Scrolled display (Center mode display)
If you are operating the main unit, press the LISTEN MODE key
then select by turning the MULTI CONTROL jog dial in place of press-
ing the “@#” key of the remote control unit.
A
L
M
R
O
N
Y
3
s
T
B
L
O
D
| Scrolled display (DOLBY 3 STEREO)
The center mode display scrolls.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood ud 951m at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood ud 951m in the language / languages: English as an attachment in your email.

The manual is 3,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info