683161
177
Zoom out
Zoom in
Previous page
1/196
Next page
Reset
Settings data that are stored on this transceiver can be saved
easily to another data storage media. Also, when overwriting
settings saved in the memory of this transceiver with new settings,
5 types of reset options are available which can be chosen freely
according to the user’s intentions.
Menu Reset:
Resets only the settings configured in the menu.
The settings for TX inhibit, clock menu, LAN menu, advanced
menu, linear amplifier menu, KNS menu, dimmer menu, timer
menu and auto mode are not reset.
Memory Channel Reset:
Resets the settings data of the memory channels and quick
memory channels.
VFO Reset:
Resets only the VFO information.
Standard Reset:
Resets the settings data while partially retaining the settings of this
transceiver.
Full Reset:
Resets all settings to the factory settings.
All image data that are stored in the built-in memory of the
transceiver will be erased after Full Reset.
Data of the memory channels and quick memory
channels, menu data, antenna tuner preset values, auto
mode frequency setting and the different level settings
will not be reset during VFO Reset.
When any of the reset options starts, all the past settings
data will be erased. Thus, make sure to perform reset
after saving the settings to another data storage media.
In Menu [1-06], the default setting for auto voice guide is
configured to OFF. When performing a reset other than
Memory Channel Reset and VFO Reset, the settings in
Menu [1-06] are reset and auto voice guide will not be
output.
The transceiver is reset as follows.
1 Press [MENU].
2 Press F [RESET] to display the Reset screen.
If F [RESET] is not displayed, press F [MORE] to display F
[RESET].
.
3
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select a reset type.
4 Press F4 [SELECT].
A message to confirm the start of the reset process is
displayed.
.
Pressing F7 [CANCEL] clears the reset confirmation
message without starting reset.
5 Press F4 [RESET].
Reset is performed and this transceiver reboots automatically.
When this transceiver cannot be operated properly or the
screen cannot be displayed properly when the power is
turned on, press [A/B] and [CLR] while turning on the
power to perform Full Reset. A “Full Reset in progress”
message is displayed and all settings are reset to the
factory settings.
Firmware Update
There are occasions when the firmware is updated following
additions or enhancements made to the functions.
The latest firmware version can be obtained from the following
website.
http://www.kenwood.com/i/products/info/amateur/
software_download.html
For more details on firmware update, please visit the website.
Firmware Version Check
Check the current firmware version before updating the firmware.
Check in Advanced Menu [27]
Firmware Version
.
If a “firmware update failed” screen constantly appears
while update is in progress, this could be due to system
failure. Please contact KENWOOD service center.
MAINTENANCE AND ADJUSTMENT 17
17 MAINTENANCE AND ADJUSTMENT
17-1
177


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info