683161
159
Zoom out
Zoom in
Previous page
1/196
Next page
Configuring the Power-on Message
A power-on message can be displayed on the screen after the
power of this transceiver is turned on and before it starts up. A text
message such as the call sign can be configured as the power-on
message according to the user’s preferences.
Configure in Menu [0-06] Power-on Message
Use the function keys, [MULTI/CH] control or USB keyboard to
enter a message.
Enter a message that contains not more than 15 characters.
The default setting is “HELLO”.
Key Behavior
F1 [SPACE] Inserts a space.
F2 [–]/ F3 [+] Selects a character.
F4 [ ]/ F5 [ ]
Moves the cursor.
F [BACK SPACE]
Deletes the character to the left of the
cursor.
F [DEL]
Deletes the character to the right of the
cursor.
F [CHAR]
Switches the type of character to edit.
Pressing the key each time switches the
selection in the following sequence:
ABC (upper case) → abc (lower case)
→ !”# (symbols) → ABC (upper case)
F6 [SAVE] Registers the edited characters.
Configuring the Screen Saver
A screen saver is launched automatically if this transceiver is not
operated for a duration as configured in the time for activating the
screen saver.
This transceiver comes with 3 types of screen savers. Configuring
to the Type 2 screen saver allows a manually input text to be
displayed on the screen.
Configuring the Screen Saver Type
The type of screen saver to use can be selected as follows.
Configure in Menu [0-03]
Screen Saver
Setting Value Off (default)/ Type 1/ Type 2/ Type 3/ Display Off
Type 1: Displays only an image.
Type 2: Displays both image and text.
Type 3: Displays an image stored in the built-in memory.
When screen saver is set to “Display Off”, the backlight of
the screen turns off and output to an external display is also
turned off temporarily after a specific period of inactivity.
The screen saver display can be cleared by operating
any key or control or touching the screen of this
transceiver.
If images for used by Type 3 are not saved, the screen
saver cannot be displayed even when Type 3 is selected.
Saving Images for Use by Type 3 Screen Saver
Follow the steps below to save the image to display as the Type 3
screen saver from a USB flash drive to the built-in memory of the
transceiver.
Image files that are used as the screen saver must be of the jpg
or jpeg extension with a resolution not higher than 20
megapixels (1920 × 1080 pixels).
1
Copy the images into the KENWOOD\TS-890\IMAGE
folder of the USB flash drive using a PC.
2 Connect the USB flash drive to this transceiver.
3 Press [MENU].
4 Press F [USB/FILE] to display the USB/File
Management menu screen.
If F [USB/FILE] is not displayed, press F [MORE] to display
F [USB/FILE].
5
Press F2 [ ]/ F3 [ ] to select Image Files for
Screen Saver (Type 3).
6 Press F4 [SELECT].
A confirmation screen on the reading of image files is
displayed.
Pressing F7 [CANCEL] returns the display to the USB/File
Management menu screen without starting the reading.
7 Press F4 [OK].
The reading of files starts.
When image files are imported into the built-in memory
of the transceiver, all images that were previously
imported will be erased. (Please note that if the specified
folder of the USB flash drive that is imported is empty, all
image files in the built-in memory of the transceiver will
be erased.)
The display sequence during a slideshow follows the
sequence of the character codes (ISO-8859-1). For
instance, when files are named in running numbers, they
will be displayed in the ascending order as follows:
001_aaa.jpg, 002_bbb.jpg, 003_ccc.jpg.
All image data that are imported to the built-in memory of
the transceiver will be erased when standard reset or full
reset is performed.
Configuring the Time for Launching the Screen Saver
The timing for launching the screen saver after the keys or controls
are last operated can be configured on this transceiver.
Configure in Menu [0-04]
Screen Saver Wait Time
Setting Value
Preview (5 [sec]) (default)/ 5 [min]/ 15 [min]/ 30
[min]/ 60 [min]
OTHER FUNCTIONS 16
16 OTHER FUNCTIONS
16-1
159


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info