683161
131
Zoom out
Zoom in
Previous page
1/196
Next page
Sending a Voice Message
A recorded voice message can be transmitted while it is being
played back.
1 Press F2 [TX MSG] to display the Voice Message
screen.
2 Press and hold the function key (F2 [CH 1] to F7 [CH
6]) corresponding to the channel that contains the
voice message to be transmitted.
A voice message playback screen is displayed, and the
voice message is transmitted.
.
Turning the [MIC/PITCH] control while transmission of a
voice message is in progress enables the gain level of the
microphone used exclusively for the voice message to be
adjusted.
The following operations are possible while a voice
message is being transmitted.
Operation
Behavior
Press F5
[REPEAT].
Plays back and transmits the voice message
repeatedly. Pressing F5 [REPEAT] again ends
repeat playback and transmission, and returns
this transceiver to the RX mode.
<<
>> lights up while repeat playback is
in progress.
The time interval for repeating the
transmission can be configured.
Press F4 [
STOP].
Stops transmission of the voice message and
closes the voice message transmission screen.
Press [ESC].
Closes the Voice Message screen and ends
transmission of the voice message.
Deleting a Voice Message
Follow the steps below to delete a recorded voice message.
1 Select a channel that contains the voice message
to be deleted.
.
2 Press and hold F7 [(DELETE)] to delete the selected
voice message.
Configuring the Time Interval for Repeated
Transmission
The time interval for repeating playback of a voice message can
be configured.
Configure in Menu [5-16]
CW/Voice Message
Retransmit Interval Time
Setting Value 0 to 10 (default) to 60 [s] (1 step)
Configuring to a larger value lengthens the playback interval.
Recording/Playing Voice Communication
This transceiver can be used to record voice communication or
play back the recordings.
Recording functions that can be used on this transceiver are as
follows.
Manual Recording
Voice recordings up to 9 hours per file can be stored in the built-
in memory of this transceiver. As the built-in memory is also
used by other functions, the maximum recording time varies
depending on the remaining space available.
Voice data up to 18 hours per file can be recorded when a USB
flash drive is used. If recording continues for a duration longer
than 18 hours per file, a new file will be created upon reaching
18 hours and recording will continue.
Full-time Recording
This recording function records the most recent voice data up to
the last 30 seconds to an audio file.
Timer Recording (USB Flash Drive Only)
This function records audio based on the preconfigured duration
and conditions. For more details on the timer recording operation,
please refer to “Timer” (14-4).
If DC power is turned off during recording, the saving of
the file recorded at that time is not guaranteed. To turn
off the power during recording, do so using [
] on the
front panel.
Manual Recording
The [
] and [ ] keys can be used to start or stop recording of
communication using this transceiver.
1
Press [ ] to start recording.
REC” appears on the screen and the [REC] LED lights
up.
.
2
Press [ ] to end the recording.
REC” disappears from the screen and the [REC] LED
light goes off.
When the remaining memory at the destination for
storing the file runs out while recording is in progress, a
“recording end” tone is output and the recording ends
automatically.
VOICE MESSAGE/AUDIO FILE 12
12-3
131


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info