683161
90
Zoom out
Zoom in
Previous page
1/196
Next page
Changing the Passband Width and Shift Amount
When in the CW or SSB-DATA mode, the passband width and shift
amount of the DSP filter can be altered. When in the RTTY (FSK)
or PSK mode, the passband width can be changed. The passband
width can be changed so that the interfering signal falls outside the
bandwidth of the filter.
.
Interfering Signal
Interfering
Signal
Target Signal
1 Press the mode key to select CW, USB-DATA, LSB-
DATA, FSK or PSK mode.
2 Press and hold [IF FIL] to display the RX Filter
screen.
3 Turn the [LO/WIDTH] control to change the
passband width.
Turning the control to the right widens the passband width,
while turning to the left narrows it.
4 Turn the [HIGH/SHIFT] control to shift the frequency
band.
Turning the control to the right shifts the frequency to the high
bandwidth, while turning to the left shifts it to the low bandwidth.
The shift frequency band cannot be adjusted in the FSK and
PSK modes.
The amount of change and the filter shape are displayed on
the filter scope and RX Filter screen.
.
Mode
Passband Width (Hz) Shift Frequency (Hz)
Setting Value Setting Value Step
SSB/ SSB-
DATA
50/ 80/ 100/ 150/ 200/
250/ 300/ 350/ 400/
450/ 500/ 600/ 700/
800/ 900/ 1000/ 1100/
1200/ 1300/ 1400/
1500/ 1600/ 1700/
1800/ 1900/ 2000/
2100/ 2200/ 2300/
2400/ 2500/ 2600
(default)/ 2700/ 2800/
2900/ 3000
50 to 1500 (default) to
2500
50
CW
50/ 80/ 100/ 150/ 200/
250/ 300/ 350/ 400/
450/ 500 (default)/
600/ 700/ 800/ 900/
1000/ 1500/ 2000/
2500
-800 to 0 (default) to
+800
10
FSK
250/ 300/ 350/ 400/
450/ 500 (default)/
1000/ 1500
PSK
50/ 80/ 100/ 150/ 200/
250/ 300/ 350/ 400/
450/ 500 (default)/
600/ 700/ 800/ 900/
1000/ 1200/ 1400/
1500/ 1600/ 1800/
2000/ 2200/ 2400/
2600/ 2800/ 3000
5 Press and hold [IF FIL] or press [ESC] to end the
process.
6 REJECTING INTERFERENCE
6-4
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info