683161
50
Zoom out
Zoom in
Previous page
1/196
Next page
Frequency Adjustment Using the [MULTI/CH] Control
Turning the [MULTI/CH] control enables the frequency to be
changed quickly. The frequency increases or decreases in
increments based on the configured step size.
Turn the [MULTI/CH] control to increase or
decrease the frequency.
The default frequency per step is 1 kHz in the SSB mode,
0.5 kHz in the CW/ FSK/ PSK mode, 5 kHz in the AM mode and
10 kHz in the FM mode.
Rounding the Frequency
When the frequency is adjusted by turning the [MULTI/CH]
control, the new frequency is automatically rounded to the integer
multiple of the step size. Rounding of the frequency can also be
disabled.
Configure in Menu [3-00] Frequency Rounding Off
(Multi/Channel Control)
Setting Value Off/ On (default)
Configuring the Frequency Step Size of the
[MULTI/CH] Control
The frequency per step when the [MULTI/CH] control is turned
can be configured or changed to a different value for each mode.
SSB Mode
Configure in Menu [3-01] SSB Mode Frequency
Step Size (Multi/Channel Control)
Setting Value 0.5/ 1 (default)/ 2.5/ 5/ 10 [kHz]
CW/ FSK/ PSK Mode
Configure in Menu [3-02] CW/FSK/PSK Mode
Frequency Step Size (Multi/Channel Control)
Setting Value 0.5 (default)/ 1/ 2.5/ 5/ 10 [kHz]
FM Mode
Configure in Menu [3-03] FM Mode Frequency Step
Size (Multi/Channel Control)
Setting Value
5/ 6.25/ 10 (default)/ 12.5/ 15/ 20/ 25/ 30/ 50/ 100
[kHz]
AM Mode
Configure in Menu [3-04] AM Mode Frequency Step
Size (Multi/Channel Control)
Setting Value
5 (default)/ 6.25/ 10/ 12.5/ 15/ 20/ 25/ 30/ 50/ 100
[kHz]
Switching the AM Broadcast Frequency in 9 kHz Steps
In the BC band (medium frequency band) from 522 kHz to
1710 kHz and LF band (long frequency band) from 153 kHz to
279 kHz, the RX frequency can be adjusted in steps of 9 kHz by
turning the [MULTI/CH] control.
Configure in Menu [3-05] 9 kHz Step in AM
Broadcast Band (Multi/Channel Control)
Setting Value Off (K type: default)/ On (E type: default)
Adjusting Frequency in MHz Steps
The frequency can be adjusted in units of MHz.
1 Press [MHz].
Pressing [MHz] each time toggles the MHz step function
between ON and OFF.
When the function is turned ON, <<
>> lights up.
2 Turn the [MULTI/CH] control while the function is
turned ON.
The frequency increases or decreases according to the MHz
frequency step configured in Menu [3-06].
Configuring the Frequency Step Size in MHz
Configure in Menu [3-06] MHz Step
Setting Value 100/ 500/ 1000 (default) [kHz]
Direct Input of Frequency Value
If the desired frequency is far apart from the current frequency
value, the fastest way is to input the frequency value directly using
the numeric keypad.
1 Press [ENT].
A screen to input the frequency for the operable band appears
with all the frequency digits displayed as “-”.
.
4 BASIC OPERATIONS
4-6
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info