683161

Kenwood TS-890S Manual

49
Zoom out
Zoom in
Previous page
1/196
Next page
Configuring Auto Mode Frequency Points
1 Display the Auto Mode screen.
2 Turn the Tuning control to select a frequency point.
Align the frequency of the selected band with the frequency to
register.
3 Press the Mode key or press and hold down the key
to switch to the mode to which the band is to be
registered.
4 Press F4 [COPY] to copy the frequency and mode.
•
The frequency and mode of the selected band is imported
into the list as a new classification.
•
To delete a registered classification, press F2 [
]/ F3
[ ] or turn the [MULTI/CH] control to select the row to
delete, followed by pressing F5 [DELETE] to delete the row.
Doing so shifts up the classifications after the deleted row in
the list.
5 Repeat the steps from 2 to 5 to configure the
frequency and mode for all the points.
6 Press F6 [OK].
7 Press [MENU] or [ESC] to end the process.
•
When the Auto Mode is turned ON, the mode that is assigned
to the respective channels will be automatically selected. In the
SSB mode, LSB mode will be selected for frequencies below
10.1 MHz, and USB mode will be selected for frequencies that
are 10.1 MHz or higher.
•
The table below shows an example when auto mode frequency
is configured to the HF/50/70 MHz band.
Frequency
Mode Preset Frequency Range
1.620 MHz AM 30 kHz≦f<1.62 MHz
2.000 MHz CW 1.62 MHz≦f<2.0 MHz
3.500 MHz LSB 2.0 MHz≦f<3.5 MHz
3.525 MHz CW 3.5 MHz≦f<3.535 MHz
10.100 MHz LSB 3.535 MHz≦f<10.1 MHz
10.150 MHz CW 10.1 MHz≦f<10.15 MHz
14.000 MHz USB 10.15 MHz≦f<14.0 MHz
14.070 MHz CW-R 14.0 MHz≦f<14.07 MHz
14.112 MHz FSK 14.07 MHz≦f<14.112 MHz
18.068 MHz USB 14.112 MHz≦f<18.068 MHz
18.110 MHz CW 18.068 MHz≦f<18.11 MHz
21.000 MHz USB 18.11 MHz≦f<21.0 MHz
21.070 MHz CW 21.0 MHz≦f<21.07 MHz
21.125 MHz FSK-R 21.07 MHz≦f<21.125 MHz
21.150 MHz CW 21.125 MHz≦f<21.15 MHz
24.890 MHz USB 21.15 MHz≦f<24.89 MHz
24.930 MHz CW 24.89 MHz≦f<24.93 MHz
28.000 MHz USB 24.93 MHz≦f<28.0 MHz
28.070 MHz CW 28.0 MHz≦f<28.07 MHz
28.150 MHz FSK 28.07 MHz≦f<28.15 MHz
28.200 MHz CW 28.15 MHz≦f<28.2 MHz
29.000 MHz USB 28.2 MHz≦f<29.0 MHz
30.000 MHz
FM-DATA
29.0 MHz≦f<30.0 MHz
50.000 MHz USB 30.0 MHz≦f<50.0 MHz
50.100 MHz CW 50.0 MHz≦f<50.1 MHz
51.000 MHz USB 50.1 MHz≦f<51.0 MHz
52.000 MHz FM 51.0 MHz≦f<52.0 MHz
– USB
52.0 MHz≦f<60.0 MHz (K type)
52.0 MHz≦f<74.8 MHz (E type)
Adjustment of Frequencies
The steps to adjust the TX and RX frequencies are described
below.
Adjustment Using the Tuning Control
Turn the Tuning control to increase or decrease the
frequency.
Adjustment Using the Microphone Key
Press the [UP] or [DWN] key on the microphone to
increase or decrease the frequency.
FINE Tuning
The step frequency of the Tuning control can be configured to
one-tenth of the step size. Doing so allows fine-tuning of the
frequency.
Press [FINE].
Pressing [FINE] each time toggles FINE tuning between ON
and OFF.
●
When fine tuning is set to OFF, the 1 Hz digit frequency
display will be grayed out. When in the FM or AM mode,
both the 10 Hz and 1 Hz digits are grayed out. Setting
fine tuning to ON turns off the gray-out display and shows
the frequency in full up to the 1 Hz digit.
●
Depending on the operating frequency, the 1 Hz digit
display may not gray out on the operating frequency
display of the transverter even when fine tuning is set to
OFF.
Configuring the Number of Steps per Revolution of
the Tuning Control
The number of steps per revolution of the Tuning control can be
changed.
Configure in Menu [3-07]
“Tuning Control: Number
of Steps per Revolution”
Setting Value 250/ 500/ 1000 (default) [Step]
Configuring the Fast Forward Rate of the Tuning
Control
This function enables the speed of frequency change to increase
by 2 to 10 times with respect to the speed of turning when the
Tuning control is turned at a fast speed.
Configure in Menu [3-08]
“Tuning Speed Control”
Setting Value Off (default)/ 2 to 10 (1 step)
Configuring the Sensitivity for Starting the Fast
Forward Operation
Configuring this to a larger value increases the sensitivity for
starting the fast forward operation.
Configure in Menu [3-09]
“Tuning Speed Control
Sensitivity”
Setting Value 1 to 5 (default) to 10 (1 step)
BASIC OPERATIONS 4
4-5
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info