683161
47
Zoom out
Zoom in
Previous page
1/196
Next page
Selecting VFO A/ B
This transceiver is equipped with two VFOs, A and B. The two
VFOs operate independently of each other, and thus can be
configured to different frequencies and modes. Additionally, one
VFO can be configured to the TX frequency and the other to the
RX frequency.
Press [A/B].
Pressing [A/B] each time switches between “VFO A” and “VFO
B”. The currently selected VFO is indicated as << >> or
<<
>>.
Pressing and holding down [A/B] configures both “VFO A”
and “VFO B” to the same frequency and mode.
Selecting an Operating Band
Below are steps to select the frequency bandwidth to use. A
different frequency bandwidth can be selected for VFO A and VFO
B. By using the numeric keypad or [GENE] key, it is possible to call
up an amateur frequency between 1.8 MHz and 50 MHz or a
general band frequency such as 70 MHz (E type), 135 kHz, 475
kHz, MW broadcast band, and 5 MHz at one touch.
This transceiver comes with a band memory feature that is able
to store up to 5 pairs of frequencies and modes (3 pairs in the
default setting) that were used most recently for each band.
Press [1 (1.8)] to [0 (50)] or [GENE].
Pressing one of the above keys saves the current VFO
frequency and mode and calls up the next memory band at
the same time. Pressing the key each time switches to the
next band memory in sequence from band memory 1 to band
memory 5.
Frequencies that are out of the range of the band memory
will not be stored.
The default values for each of the band memories are as
follows.
K Type
Band/
Frequency
(MHz)/
Mode
Default Setting (MHz)/Mode
Band
Memory
1
Band
Memory
2
Band
Memory
3
Band
Memory
4
Band
Memory
5
1.8 MHz/
1.62 to 2
1.8/
CW
1.81/
CW
1.82/
CW
1.83/
CW
1.84/
CW
3.5 MHz/
3 to 4
3.5/
LSB
3.6/
LSB
3.7/
LSB
3.8/
LSB
3.9/
LSB
7 MHz/
6.5 to 7.5
7.0/
LSB
7.05/
LSB
7.1/
LSB
7.15/
LSB
7.2/
LSB
10 MHz/
10 to 10.5
10.1/
CW
10.11/
CW
10.12/
CW
10.13/
CW
10.14/
CW
14 MHz/
13.5 to
14.5
14.0/
USB
14.1/
USB
14.15/
USB
14.20/
USB
14.25/
USB
18 MHz/
18 to 19
18.068/
USB
18.1/
USB
18.11/
USB
18.15/
USB
18.16/
USB
21 MHz/
20.5 to
21.5
21.0/
USB
21.1/
USB
21.15/
USB
21.2/
USB
21.3/
USB
24 MHz/
24 to 25
24.89/
USB
24.92/
USB
24.94/
USB
24.96/
USB
24.98/
USB
28 MHz/
27.5 to 30
28/
USB
28.3/
USB
28.5/
USB
29/
FM
29.3/
FM
50 MHz/
50 to 54
50/
USB
50.125/
USB
50.2/
USB
51/
FM
52/
FM
General/
0.030 to 60
0.1357/
CW
0.472/
CW
1/
AM
5.3305/
USB
5.4035/
USB
E Type
Band/
Frequency
(MHz)
Default Setting (MHz)/Mode
Band
Memory
1
Band
Memory
2
Band
Memory
3
Band
Memory
4
Band
Memory
5
1.8 MHz/
1.62 to 2
1.83/
CW
1.84/
CW
1.85/
CW
1.81/
CW
1.82/
CW
3.5 MHz/
3 to 4
3.5/
LSB
3.55/
LSB
3.6/
LSB
3.65/
LSB
3.7/
LSB
7 MHz/
6.5 to 7.5
7.0/
LSB
7.05/
LSB
7.1/
LSB
7.15/
LSB
7.2/
LSB
10 MHz/
10 to 10.5
10.1/
CW
10.11/
CW
10.12/
CW
10.13/
CW
10.14/
CW
14 MHz/
13.5 to
14.5
14.0/
USB
14.1/
USB
14.15/
USB
14.20/
USB
14.25/
USB
18 MHz/
18 to 19
18.068/
USB
18.1/
USB
18.11/
USB
18.15/
USB
18.16/
USB
21 MHz/
20.5 to
21.5
21.0/ USB 21.1/ USB
21.15/
USB
21.2/ USB 21.3/ USB
24 MHz/ 24
to 25
24.89/
USB
24.92/
USB
24.94/
USB
24.96/
USB
24.98/
USB
28 MHz/
27.5 to 30
28/
USB
28.3/
USB
28.5/
USB
29/
FM
29.3/
FM
50 MHz/
50 to 54
50/
USB
50.15/
USB
50.2/
USB
51/
FM
52/
FM
General/
0.030 to
74.8
70.1/
USB
0.1357/
CW
0.472/
CW
0.999/
AM
5.2585/
USB
When the number of band memories is reduced, the
change will be applied when the band memory is
switched.
Changing the Number of Band Memories
The number of band memories can be changed.
Configure in Menu [3-11]
Number of Band
Memories
Setting Value 1/ 3 (default)/ 5
BASIC OPERATIONS 4
4-3
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-890S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-890S in the language / languages: English as an attachment in your email.

The manual is 21,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-890S

Kenwood TS-890S User Manual - German - 196 pages

Kenwood TS-890S User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info