606693
95
Zoom out
Zoom in
Previous page
1/104
Next page
89
APPENDICES
READING COMMAND TABLES
q Command
w Name
e Function of the command
r The format of the command is shown. When oblique lines are drawn in the 1st and 2nd columns, there is no Set
command.
t The format of the command for reading the transceiver’s current status is shown. When oblique lines are drawn in
the 1st and 2nd columns, there is no Read command.
y The format of the command output from the transceiver is shown. When oblique lines are drawn in the 1st and 2nd
columns, there is no Answer command.
u The number of command digits is shown.
i Corresponds to the parameter of the command format.
o Corresponds to the Format number in the Parameter Table. For the parameter formats, refer to the Parameter
Table {page 84}.
!0 Indicates the function of the parameter.
COMMAND TABLES
Note:
Parameters that have a Parameter Function of “NOT USED” are not supported by the TS-870S. Any character except the ASCII control
codes (00 to 1Fh) and the terminator (;) may be entered for those parameters.
1
Auto information OFF/ON
AI
AUTO INFORMATION
2
Parameter Format Parameter function
P1 32 AI NUMBER
34567891011121314
Input FunctionOutput
SetReadAnswer
1234567891011121314
123
AI
P1
AI
P1
;
AI ;
4567891011121314
;
Note:
For other commands, controls whether
changing a parameter will or will not trigger
the corresponding Answer command
to be output.
Ex:
For IF, the Answer command is output
if the step frequency or RIT/XIT
frequency is changed.
1
Sets or reads AF gain.
AG
AF GAIN
2
Parameter Format Parameter function
P1 31
AF GAIN
34567891011121314
Input FunctionOutput
SetReadAnswer
1234567891011121314
123
AG
P1
;
AG ;
4567891011121314
P1AG
;
1
Selects antenna connector ANT 1/ ANT 2.
AN
ANTENNA NUMBER
2
Parameter Format Parameter function
P1 33 ANTENNA
NUMBER
34567891011121314
Input FunctionOutput
SetReadAnswer
1234567891011121314
123
AN
P1
AN
P1
;
AN ;
4567891011121314
;
1
Antenna Tuner THRU/IN -LINE, and tuning START/CANCEL
AC
ANTENNA TUNER CONTROL
Note:
P1 is used for Answer only.
Tuning cannot be started if P2 is in the
THRU state (If P2="0", selecting "1" for P3
does not start tuning).
P1: RX THRU/IN P2: TX THRU/IN
2
Parameter Format Parameter function
P1
P2
P3
30
30
1
TUNE THRU/IN
(Answer Only)
TUNE THRU/IN
TUNE OFF/ON
34567891011121314
Input FunctionOutput
SetReadAnswer
1234567891011121314
123
AC P2P3 ;
ACP1P2 P3 ;
AC ;
4567891011121314
1
Antenna Tuner THRU/IN -LINE, and tuning START/CANCEL
AC
ANTENNA TUNER CONTROL
Note:
P1 is used for Answer only.
Tuning cannot be started if P2 is in the
THRU state (If P2="0", selecting "1" for P3
does not start tuning).
P1: RX THRU/IN P2: TX THRU/IN
2
Parameter Format Parameter function
P1
P2
P3
30
30
1
TUNE THRU/IN
(Answer Only)
TUNE THRU/IN
TUNE OFF/ON
34567891011121314
Input FunctionOutput
SetReadAnswer
1234567891011121314
123
AC P2P3 ;
ACP1P2 P3 ;
AC ;
4567891011121314
q
u
i
o
!0
w
r
t
y
e
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-870S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-870S in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-870S

Kenwood TS-870S User Manual - Dutch - 102 pages

Kenwood TS-870S User Manual - French - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info