606693
12
Zoom out
Zoom in
Previous page
1/104
Next page
6
2 INSTALLATION
Antenna Tuner (AT)
If using an external AT-300 antenna tuner, connect it here using the cable supplied with the antenna tuner. The
AT-300 must be connected to ANT 1; it will not function if connected to ANT 2.
SM-230 Station Monitor (IF OUT 1)
Connect a cable from the IF OUT 1 jack to the IF IN jack on the SM-230 Station Monitor. This cable couples the
8.83 MHz IF from your TS-870S for pan display on the Station Monitor.
Accessory Equipment (ACC 2)
If you intend to use this transceiver for any of the digital modes, connect the input/output connections from a
Terminal Node Controller (TNC) for Packet operation, a Multimode Communications Processor (MCP) for operation
on Packet, PacTOR, AMTOR, G-TOR, or FAX, or a Clover interface to this connector.
SSTV and phone patch equipment can also be connected to ACC 2. SSTV operation is possible by connecting the
input/output from a computer sound card to ACC 2, then running an SSTV application on the computer.
To operate on the digital modes, you will need the following equipment:
•Personal computer with communications software (alternatively, a “dumb” terminal capable of sending ASCII
commands)
TNC (Terminal Node Controller) or MCP (Multimode Communications Processor)
TNC or MCP power supply
RS-232C cable
13-pin DIN plug and cable
Connect your TNC or MCP to the ACC 2 connector on the transceiver Rear Panel using a cable equipped with a
13-pin DIN plug.
Do not share a single power supply between the transceiver and the TNC or MCP. Keep as wide a separation
between the transceiver and computer as practical to reduce noise-pickup by the transceiver. Refer to the
accompanying table for connection information.
TS-870S
AT-300
TS-870S
SM-230
To Antenna
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-870S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-870S in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-870S

Kenwood TS-870S User Manual - Dutch - 102 pages

Kenwood TS-870S User Manual - French - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info