606692
22
Zoom out
Zoom in
Previous page
1/96
Next page
14
4 MENU SETUP
WHAT IS A MENU?
Many functions on this transceiver are selected or
confi gured via a software-controlled Menu, rather than
through the physical controls of the transceiver. Once
familiar with the Menu system, you will appreciate
the versatility it offers. You can customize the various
timings, settings, and programming functions on this
transceiver to meet your needs without using many
controls and switches.
MENU A/ MENU B
This transceiver has 2 menus: Menu A and Menu B.
These menus contain identical functions and can be
confi gured independently. The transceiver, therefore,
allows you to switch between 2 different environments
quickly and easily. For example, you can confi gure
Menu A for DXing and contesting while Menu B is
for relaxed local ragchewing. By switching from
Menu A to Menu B, you can instantly change the
Menu confi guration and key assignment to suit your
current operating style. Or, 2 operators may share
a single transceiver by dedicating one Menu to each
operator. Both operators can always enjoy their own
confi guration.
MENU ACCESS
1 Press [MENU].
The Menu No. and setting appear on the
display, and the explanation of the menu
appears on the sub-display.
2 Press [A/B (A=B)] to select Menu A or B.
• “ or “ appears, indicating which Menu is
selected.
3 Press [Q-M.IN]/ [Q-MR] or turn the MULTI/CH
control to select the desired Menu No.
Each time you change the Menu No.,
a different scrolling message appears on the
sub-display, describing the Menu No.
4 Press [M.IN]/ [SCAN (SG.SEL)], or Mic [UP]/
[DWN] to select a parameter.
5 Press [MENU] to exit Menu mode.
QUICK MENU
Because the number of functions this transceiver
provides is extraordinary, there are numerous items
in each Menu. If you fi nd accessing desired Menu
Nos. to be too time consuming, use the Quick Menu to
create your own customized, abbreviated Menu. You
can then add those Menu Nos. which you frequently
use, to the Quick Menu. Copying Menu Nos. to the
Quick Menu has no effect on the Menu.
PROGRAMMING THE QUICK MENU
1 Press [MENU].
2 Press [Q-M.IN]/ [Q-MR] or turn the MULTI/CH
control to select the desired Menu No.
3 Press [FINE (F.LOCK)].
• “ appears, indicating that the Menu item has
been added to the Quick Menu.
To remove the item from the Quick Menu, press
[FINE (F.LOCK)] again. disappears.
4 Press [MENU] to exit Menu mode.
USING THE QUICK MENU
1 Press [MENU].
2 Press [MHz].
• “ appears.
3 Press [Q-M.IN]/ [Q-MR] or turn the MULTI/CH
control to select the desired Quick Menu No.
4 Press [M.IN]/ [SCAN (SG.SEL)], or Mic [UP]/
[DWN] to change the current setting for the
selected Menu No.
When the Menu is registered to the Quick Menu
list, “ appears.
5 Press [MENU] to exit Quick Menu mode.
Note: If the Quick Menu has not been programmed, Press
[Q-M.IN]/[Q-MR] or turning the MULTI/CH control in step 2
causes “CHECK” to be output in Morse code.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-590SG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-590SG in the language / languages: English as an attachment in your email.

The manual is 4,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-590SG

Kenwood TS-590SG User Manual - German - 96 pages

Kenwood TS-590SG User Manual - Dutch - 96 pages

Kenwood TS-590SG User Manual - French - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info