511243
77
Zoom out
Zoom in
Previous page
1/104
Next page
69
13 OPERATOR CONVENIENCES
MESSAGE PLAYBACK
You can play back the message in channel 1, 2, or 3
to check or to send. It is also possible to make a
longer message by consecutively playing back the
messages of more than one channel, linking them
together.
You can even repeatedly send a longer, linked
message by using the Repeat function. To switch this
function ON, access Menu No. 31 and select “on”
(default is OFF). Then, select the repeat interval time
in Menu No. 32 (default is 10 seconds).
Note:
Pressing
[ ]
(POWER) cancels playback in progress.
The settings in Menu Nos. 31 and 32 are shared with CW
Message Playback described in “CW MESSAGE MEMORY”
{page 40}.
Checking Messages
1 Select SSB, FM, or AM mode.
Select the same mode when you recorded
the message.
•Confirm the VOX function is OFF.
2 Press [CH1/ 1/ REC], [CH2/ 2/ REC], or
[CH3/ 3/ REC], depending on which channel
you want to check.
For example, “AP 1– –” appear while playing
back the message in channel 1.
•To interrupt playback, press [MTR/ CLR].
3 To play back another message in sequence,
press the corresponding key ([CH1/ 1/ REC],
[CH2/ 2/ REC], or [CH3/ 3/ REC]) while the
first message is being played.
Up to 3 channels can be queued.
Sending Messages
1 Select SSB, FM, or AM.
Select the same mode when you recorded
the message.
2 Press [VOX/ 8] to switch VOX ON or OFF.
If you switched VOX ON, skip step 3.
3 Press and hold Mic [PTT].
4 Press [CH1/ 1/ REC], [CH2/ 2/ REC], or
[CH3/ 3/ REC], depending on which channel
you want to use.
For example, “AP 1– –” appear while playing
back the message in channel 1.
•To interrupt playback, press [MTR/ CLR].
5 To play back another message in sequence,
press the corresponding key ([CH1/ 1/ REC],
[CH2/ 2/ REC], or [CH3/ 3/ REC]) while the
first message is being played.
•Up to 3 channels can be queued.
6 Release Mic [PTT].
Erasing a Recorded Message
1 Press [CH1/ 1/ REC] (1 s) or
[CH2/ 2/ REC] (1 s) or [CH3/ 3/ REC] (1 s) to
select the message which you want to erase.
“APn – –” appear, where “n” represents the
channel number.
2 To erase the recorded message, press and
hold the same key as in step 1 ([CH1/ 1/ REC],
[CH2/ 2/ REC], or [CH3/ 3/ REC]), while
simultaneously pressing [MTR/ CLR].
•A beep sounds and the message is erased.
Changing Inter-message Interval Time
For repetitive message playback, you can change
the interval between each series of messages.
Use Menu No. 32, and select the time in the range
of 0 to 60 seconds.
Changing Message Playback Volume
Turning the AF control does not change the
volume for the message playback. To change the
message playback volume , access Menu No. 14
to select the playback volume level from “1” to “9”
or “oFF”.
CONSTANT RECORDING
By utilizing the digital recording capability of the
VGS-1, you can configure the VGS-1 to store the last
30-second of the incoming reception signal to the
VGS-1. It is similar to a flight recorder that is used in
an aircraft. You can play back the last 30 seconds of
the reception signal to confirm what has been heard.
To activate the Constant Recording function, access
Menu No. 30 and select “on”. “ ” appears and the
the transceiver starts recording the signal in
background. When you press [CH3/ 3/ REC] (1 s),
the VGS-1 stores a maximum of last 30-second of the
reception audio signal to the flash memory. While
writing the audio signal data to flash memory, “FLASH
WR” appears for a while. To playback the stored
reception signal, press [CH3/ 3/ REC].
To play back the stored reception sound, press
[CH3/ 3/ REC]. To quit, press [MTR/ CLR].
Note:
While the Menu No. 30 is ON, you cannot use the Channel 3
(CH3) message memory to record and playback your voice
message. However, the message in CH3 is not erased. When
the Constant Recording function is turned OFF (Menu No.30 is
OFF), you can playback the message on Channel 3 (CH3).
While the “ ” icon disappears, such as the VGS-1 is playing
back a message or the Voice Guide function is working, the
Constant Recording function temporarily pauses.
When you record a new message to the VGS-1, 30-second
Constant Recording buffer is cleared.
You cannot transmit a stored audio signal that is recorded with
the Constant Recording function.
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-480SAT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-480SAT in the language / languages: English as an attachment in your email.

The manual is 6,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-480SAT

Kenwood TS-480SAT User Manual - German - 104 pages

Kenwood TS-480SAT User Manual - Dutch - 104 pages

Kenwood TS-480SAT User Manual - French - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info