511242
47
Zoom out
Zoom in
Previous page
1/104
Next page
N-39
8 COMMUNICATIEHULPMIDDELEN
CW-INBREKEN
Inbreken maakt het mogelijk CW te zenden zonder handmatig
om te schakelen tussen de zend- en ontvangstfuncties. Er zijn
2 manieren om in te breken: Semi-inbreken en Volledig-
inbreken.
Semi-inbreken:
Wanneer de contactpunten van de seinsleutel open gaan,
wacht de transceiver automatisch gedurende een door u
ingestelde tijdsduur. Daarna keert de transceiver terug naar
de ontvangstfunctie.
Volledig-inbreken:
Zodra de contactpunten van de seinsleutel open gaan, keert
de transceiver terug naar de ontvangstfunctie.
SEMI-INBREKEN OF VOLLEDIG-INBREKEN GEBRUIKEN
1 Druk op [MODE] totdat u de CW-functie hebt gekozen.
“CW” of “CWR” wordt afgebeeld.
2 Druk op [VOX/ 8].
“VOX” wordt afgebeeld.
3 Druk op [KEY/ 6/ DELAY] (1 s).
De huidige instelling (FBK of vertragingstijd) wordt
afgebeeld. De standaardinstelling is FBK (Volledig-
inbreken).
4 Draai de MULTI-regelaar en kies “FBK” (Volledig-inbreken)
of een vertragingstijd voor Semi-inbreken.
Het instelbereik van de vertragingstijd loopt van
5 t/m 100 (50 ms t/m 1000 ms) in stappen van 5.
5 Begin met het zenden.
De transceiver schakelt automatisch over naar de
zendfunctie.
Als FBK (Volledig-inbreken) is ingesteld:
De transceiver schakelt onmiddellijk over naar de
ontvangstfunctie zodra de contactpunten van de
seinsleutel open gaan.
•Wanneer een vertragingstijd is ingesteld:
De transceiver schakelt over naar de ontvangstfunctie
nadat de vertragingstijd die u hebt ingesteld is
verstreken.
6 Druk op [MTR/ CLR] om de functie te verlaten.
Opmerking:
U kunt FBK (Volledig-inbreken) niet tezamen met de
lineaire versterker TL-922/922A gebruiken.
ELEKTRONISCHE KEYER
Deze transceiver is uitgerust met een ingebouwde
elektronische keyer die kan worden gebruikt door een paddle
aan te sluiten op het achterpaneel van de transceiver. Lees
“Seinsleutels voor CW (PADDLE en KEY)” {pagina 7} voor
verdere informatie over het aansluiten. De ingebouwde keyer
ondersteunt lambic (squeeze)-bediening.
SEINSNELHEID VERANDEREN
De seinsnelheid van de elektronische keyer is volledig
instelbaar. Het is belangrijk de juiste seinsnelheid in te stellen
om foutloos CW te kunnen zenden die door andere
gebruikers geheel kan worden gekopieerd. Als u een
seinsnelheid instelt die hoger is dan u kan seinen, zullen
alleen maar fouten worden gemaakt. U krijgt de beste
resultaten door een seinsnelheid in te stellen die dicht bij de
seinsnelheid ligt die door het andere station wordt gebruikt.
1 Druk op [MODE] todat u de CW-functie hebt gekozen.
“CW” of “CWR” wordt afgebeeld.
2 Druk op [KEY/ 6/ DELAY].
De huidig ingestelde seinsnelheid wordt afgebeeld.
De standaardinstelling is 20 (wpm).
3 Terwijl u met de paddle seint en naar de TX-(zend)zijtoon
luistert, draait u de MULTI-regelaar om een geschikte
seinsnelheid in te stellen.
Het instelbereik van de seinsnelheid loopt van
10 t/m 60 wpm, in stappen van 1 (wpm). Hoe hoger de
waarde, hoe hoger de seinsnelheid.
4 Druk nogmaals op [KEY/ 6/ DELAY] in de instelling te
voltooien.
Opmerking:
Als u de halfautomatische “Bug” seinsleutelfunctie
gebruikt, is de ingestelde seinsnelheid alleen van toepassing op de
snelheid waarmee de punten worden geseind.
SEINGEWICHT INSTELLEN
De elektronische keyer kan het punt/streep-gewicht
automatisch veranderen. Het seingewicht is de verhouding
tussen de puntlengte en de streeplengte. Het seingewicht
verandert met de seinsnelheid, waardoor het voor andere
gebruikers gemakkelijker wordt uw seinen te kopiëren
standaardinstelling .
Open Menunummer 35 en kies “AUto” of een vaste
gewichtsverhouding van “2,5” t/m “4,0” (in stappen van 0,1).
De standaardinstelling is “AUto”. Als een vaste gewichts-
verhouding is ingesteld, blijft het punt/streep-gewicht
ongewijzigd, ongeacht de seinsnelheid.
Gewicht Omkeren
Als de seingewicht instellen is gekozen, wordt het
seingewicht verhoogd naarmate de seinsnelheid hoger
wordt. De elektronische keyer kan echter ook het
seingewicht verlagen met het toenemen van de
seinsnelheid.
Als u deze functie wilt inschakelen, opent u Menunummer
36 en kiest u “on” (Aan). De standaardinstelling is Uit.
dreekegmO
thciwegnies
)mpw(diehlensnieS
52m/t01 54m/t62 06m/t64
tiU8,2:10,3:12,3:1
naA2,3:10,3:18,2:1
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-480HX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-480HX in the language / languages: Dutch as an attachment in your email.

The manual is 6,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TS-480HX

Kenwood TS-480HX User Manual - English - 104 pages

Kenwood TS-480HX User Manual - German - 104 pages

Kenwood TS-480HX User Manual - French - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info