45743
99
Zoom out
Zoom in
Previous page
1/150
Next page
91
15 OPERATOR CONVENIENCES
VS-3 VOICE SYNTHESIZER (OPTIONAL)
Install the optional VS-3 unit to use this function.
Each time you change the transceiver mode such
as VFO A/B or Memory Recall, the transceiver
automatically announces the new mode. In
addition, you can program the front panel [PF] key
so that pressing it makes the transceiver announce
the displayed information. If you have the optional
MC-47 microphone, you can program one of the
Mic [PF] keys for this function as well.
For an explanation on how to install the VS-3 unit,
refer to “INSTALLING OPTIONS” {page 97}.
The table below indicates what the transceiver
automatically announces when it changes the settings.
desserPyeK noitarepO tnemecnuonnA
]B/A[
AOFV
ycneuqerf+OFV
BOFV
][,]+[ egnahcdnaB
]LLAC[ lennahcllaCycneuqerf+llaC
]M/OFV[
roOFV
yromeM
llaceR
ycneuqerf+OFV
ro
.oNyromeM+RM
ycneuqerf+
]UNEM[ /
][,]+[
.oNuneM
noitceles
+.oN+uneM
/rebmundetceleS
retemarap
]NI.M[
yromeM
edomllorcS
+lennahC+RM
)tigid-3(.oNyromeM
ycneuqerF+
]TNE[
ycneuqerF
yrtne
retnE
HC/ITLUM
lortnoc
.oNuneM
segnahc
+.oN+uneM
/rebmundetceleS
retemarap
yromeM
.oNlennahc
segnahc
yromeM+RM
+.oNlennahc
ycneuqerf
yekciremuN
yrtne
gniretnE
srebmun
rebmunyrevE
deretne
][
ehtgniruD
ycneuqerf
yrtne
ztrehageM
Note: The PF key assignment parameter is announced as the
number shown below.
rebmununeM361ECIOV462ECIOV56INOMXR
66INOMPSD76RMKCIUQ86NI.MKCIUQ96TILPS
07TES-FT17B/A27M/OFV37B=A
47NACS57OFV>M67NI.M77ENUTWC
871HC972HC083HC18ENIF
28RLC38LLAC48LRTC58zHM1
682/1TNA78BN88.R.N98.C.B
09.N.A99FFO
For the [PF] key, the transceiver will announce
different information, depending on whether VOICE1
or VOICE2 is selected.
VOICE1:
VFO or memory channel frequencies are
announced beginning with the 10 MHz digit and
continuing through to the 10 Hz digit. If the
memory channel has no data stored, “open” is
announced. For the MHz decimal point, “point” is
announced. For the kHz decimal point, a short
pause (200 ms) is made. A 200 ms pause is also
made between the channel number and the
frequency.
Menu numbers and their settings are announced
with a short pause (200 ms) between the menu
number and the setting.
Note: If operating a key or a control changes the contents of the
display while an announcement is in progress, the announcement is
interrupted.
VOICE2:
The S-meter readings at the time you pressed the
key, are announced, for example, “S5” or “20 dB”.
The table below shows the available announcements
when the [PF] (VOICE2) is pressed.
NIAM BUS
reteM-S
leveL
-ecnuonnA
tnem
reteM-S
leveL
-ecnuonnA
tnem
3~11S11S
42S22S
6~53S33S
74S44S
9~85S55S
016S66S
21~117S77S
318S88S
51~419S99S
81~61Bd0101Bd01
02~91Bd0211Bd02
22~12Bd0321Bd03
52~32Bd0431Bd04
82~62Bd0541Bd05
03~92Bd0651Bd06
1 Assign VOICE1 (63) or VOICE2 (64) to the front
panel [PF] key by accessing Menu No. 51A. Or, if
you are using the optional MC-47 or MC-52DM
microphone, assign one of the Mic [PF] keys to
either VOICE1 or VOICE2. For programming Mic
[PF] keys, refer to “MICROPHONE PF KEYS”
{page 77}.
2 Press the [PF] key that you programmed.
An announcement is made based on the
VOICE1 or VOICE2 selection.
To interrupt the announcement, press the [PF]
key again.
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-2000E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-2000E in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info