45743
83
Zoom out
Zoom in
Previous page
1/150
Next page
75
15 OPERATOR CONVENIENCES
The transceiver also generates the following warning,
confirmation, and malfunction beeps.
speeB snaemtitahW
peebtrohsdehctiphgihA.desserpsiyekdilavA
peebgnoldehctiphgihA
,detpeccasiyrtneyeKA
enutTAro,stratsnacS
.detelpmocsah
peebtrohsdehctipwolA
sinoitarepodilavninA
.demrofrep
edocesroMniLU
tiucricLLPlanretniehT
.detcetedsisutatskcolnu
edocesroMniS
ebtonnacenuTotuAWC
dilavninaro,detelpmoc
.deretnesiycneuqerf
edocesroMni5
ebtonnacenuTTA
ehtnihtiwdetelpmoc
.emitdeificeps
edocesroMniRWS
ootsiRWSsannetnaehT
ot)1:01revo(hgih
.enuTTAmrofrep
edocesroMniKCEHC
OPAehterofebetunim1
noitcnuf)ffOrewoPotuA(
reviecsnartehtsehctiws
.FFO
edocesroMniTB
WCarofgnitiaW
.dedrocerebotegassem
edocesroMniRA
egassemtnerrucehT
.llufsiyromem
CALL CHANNEL
A CALL channel is a frequency that is often used
when looking for a station with which to make contact
in FM mode. Each frequency band (HF, 50 MHz,
144 MHz, 430/ 440 MHz, and 1.2 GHz) has one
CALL channel. The default CALL frequencies are
shown below.
To recall the CALL channel:
1 Press [CALL/ C.IN].
2 Press [CALL/ C.IN] again to return to the previous
operating frequency.
To revise the default CALL channel frequency:
1 Select a new CALL frequency and operating mode
on the VFO.
2 Press [FUNC], [CALL/ C.IN] to copy the new
frequency and mode to the CALL channel.
dnaB
lennahCLLACtluafeD
edoMdnaycneuqerf
FHMF/zHM06.92
zHM05MF/zHM00.15
zHM441MF/zHM00.441
zHM044/034zHM00.034
1
zHM00.044,
2
MF/
zHG2.1MF/zHM00.0421
1
All E-types
2
K-type
DISPLAY
BRIGHTNESS
The brightness of the LCD display can be selected
from OFF, and 1 to 4 by accessing Menu No. 00.
1 Press [MENU], then turn the MULTI/ CH control to
access Menu No. 00.
2 Press [+]/ [–] to select OFF, 1, 2, 3, or 4.
3 Press [MENU] to store the setting and exit Menu
mode.
CONTRAST
The contrast of the LCD dot-matrix display can be
selected from 1 to 16 by accessing Menu No. 59.
1 Press [MENU], then turn the MULTI/ CH control to
access Menu No. 59.
2 Press [+]/ [–] to select an appropriate contrast
from 1 to 16.
3 Press [MENU] to store the setting and exit Menu
mode.
KEY ILLUMINATION
The front panel key illumination can be switched ON
or OFF.
1 Press [MENU], then turn the MULTI/ CH control to
access Menu No. 01.
2 Press [+]/ [–] to select ON or OFF.
3 Press [MENU] to store the setting and exit Menu
mode.
DTMF
MANUAL DTMF DIALING
If you have an optional MC-52DM microphone, you
can send DTMF tones while you are transmitting.
To send a series of DTMF tones:
1 Press Mic [PTT] or [SEND] on the front panel.
2 Press the desired DTMF keys to transmit.
DTMF tones are monitored through the speaker.
3 Release Mic [PTT] or press [SEND] on the front
panel to return to receive mode.
DTMF MEMORY
Entering DTMF tones
The transceiver has 10 DTMF Memory Channels.
Each channel can store a series of 16 DTMF tones.
You can also name each DTMF entry using a
maximum of 8 alpha-numeric characters.
1 Press [MENU], then turn the MULTI/ CH control to
access Menu No. 45.
2 Press [SUB] to access Menu No. 45A.
3 Press [SUB] again to enter DTMF Memory
Channel mode.
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-2000E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-2000E in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info