45743
66
Zoom out
Zoom in
Previous page
1/150
Next page
58
MEMORY FEATURES
MEMORY CHANNELS
The TS-2000(X) provides you with 300 memory
channels, numbered 00 to 299, for storing operating
frequency data, modes and other information.
Memory channels 00 to 289 are called Conventional
Memory Channels. Memory channels 290 to 299 are
designed for programming VFO tuning ranges and
scan ranges. The data you can store is listed below:
Conventional memory is used for storing data you
will often recall. For example, you may store the
frequency where you regularly meet your club
members.
retemaraP
lennahC
982~00
lennahC
992~092
ycneuqerfXRseY
seY
1
)xelpmis(
ycneuqerfXTseY
edomXRseY
seY
1
)xelpmis(
edomXTseY
seicneuqerfdnE/tratSoNseY
ycneuqerftesffOseYseY
noitceridtfihSseYseY
edomesreveRseYseY
ezispetsycneuqerfXRseY
seY
)xelpmis(
ezispetsycneuqerfXTseY
ycneuqerfenoTseYseY
ycneuqerfSSCTCseYseY
edocSCDseYseY
edomSCD/SSCTC/enoT
FFO/NO
seYseY
emanyromeMseYseY
tuokcoLlennahCyromeM
FFO/NO
seY
1
seY
1
1
Changing the data after recalling a memory channel overwrites the
contents of the channel.
STORING DATA IN MEMORY
There are 2 methods used for storing transmit/receive
frequencies and associated data in memory channels
00 to 289. Use either method, depending on the
relationship of the receive and transmit frequencies
you store:
Simplex channels:
RX frequency = TX frequency
Split-frequency channels:
RX frequency TX frequency
Memory channels 290 to 299 can also be used as
simplex channels.
Note: When RIT or XIT is ON, the frequency that includes the RIT or
XIT offset will be stored.
Simplex Channels
1 Press [A/B] to select VFO A or VFO B.
•“tA” or “tB” appears to show which VFO
is selected.
2 Select the frequency, mode, etc. to be stored.
3 Press [M.IN] to enter Memory Scroll mode.
To exit Memory Scroll mode and abort the
storage process, press [CLR].
4 Turn the MULTI/ CH control, or press Mic [UP]/
[DWN] to select a memory channel.
You can also select a channel by entering a
3-digit number, such as 012, using the
numeric keys.
5 Press [M.IN] again to store the data.
The previous data stored in the channel is
overwritten.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-2000E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-2000E in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info