45743
49
Zoom out
Zoom in
Previous page
1/150
Next page
41
9 COMMUNICATING AIDS
CUSTOMIZING TRANSMIT SIGNAL
CHARACTERISTICS
The quality of your transmitted signal is important,
regardless of which on-air activity you pursue.
However, it is easy to be casual and overlook this fact
since you don’t listen to your own signal. The
following sub-sections provide information that will
help you tailor your transmitted signal.
TX Filter Bandwidth (SSB/ AM)
Use Menu No. 22 to select one of the following
transmit bandwidths: 2.0 kHz, 2.2 kHz, 2.4 kHz
(default), 2.6 kHz, 2.8 kHz, or 3.0 kHz.
htdiwdnaB ycneuqerfdnabssaP
zHk0.2zH0052~005
zHk2.2zH0062~004
zHk4.2zH0072~003
zHk6.2zH0082~002
zHk8.2zH0092~001
1
zHk0.3zH0003~01
1
1
If the Speech Processor is ON, the low-cut filter is set to 200 Hz
for 2.8 kHz and 3.0 kHz.
TX Equalizer (SSB/ FM/ AM)
Use Menu No. 21 to change the transmit frequency
characteristics of your signal. You can select from
one of six different transmit profiles including the
default flat response. Selecting any of the following
items from the Menu causes “ ” to appear on
the display.
Off (OFF):
The default frequency response for SSB, FM,
and AM.
High boost (H BOOST):
Emphasizes higher audio frequencies; effective
for a bassy voice.
Formant pass (F PASS):
Improves clarity by suppressing audio
frequencies outside the normal voice frequency
range.
Bass boost (B BOOST):
Emphasizes lower audio frequencies; effective
for a voice with more high frequency
components.
Conventional (CONVEN):
Emphasizes by 3 dB frequencies at 600 Hz
and higher.
User (USER):
Reserved for the optional ARCP software. Off
is programmed at the factory as a default.
Frequency Response Curves
TRANSMIT INHIBIT
Transmit Inhibit prevents the transceiver from being
placed in transmit mode. No signal can be
transmitted when this function is ON even if the PTT
or [SEND] is pressed.
TX Inhibit OFF: Transmission is allowed.
TX Inhibit ON: Transmission is not allowed.
Switch the function ON or OFF via Menu No. 54. The
default is OFF.
CHANGING FREQUENCY WHILE TRANSMITTING
Moving your frequency while transmitting is usually
an unwise practice due to the risk of interfering with
other stations. However, if necessary, by using the
Tuning control you can change the operating
frequency while transmitting. You also can change
the XIT offset frequency while in transmit mode.
While transmitting, if you select a frequency outside
the transmit frequency range, the transceiver is
automatically forced to receive mode. If you selected
transmit mode by pressing [SEND], transmission will
not resume until you select a frequency inside the
transmit frequency range, at which time you must
press [SEND] again.
0.7
2.2
Amplitude
Audio
frequency
(kHz)
Bass boost
High boost
Off
Conventional
Formant pass
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-2000E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-2000E in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info