45743
29
Zoom out
Zoom in
Previous page
1/150
Next page
21
MENU SETUP
WHAT IS A MENU?
Many functions on this transceiver are selected or
configured via a software-controlled Menu, rather
than through the physical controls of the transceiver.
Once familiar with the Menu system, you will
appreciate the versatility it offers. You can customize
the various timings, settings, and programming
functions on this transceiver to meet your needs
without using many controls and switches.
MENU A/ MENU B
This transceiver has two menus: Menu A and
Menu B. These menus contain identical functions
and can be configured independently. The
transceiver, therefore, allows you to switch between
two different environments quickly and easily. For
example, you can configure Menu A for DXing and
contesting while Menu B is for the relaxed local
ragchewing. By switching from Menu A to Menu B,
you can instantly change the Menu configuration and
key assignment to suit your current operating style.
Or, two operators may share a single transceiver by
dedicating one Menu to each operator. Both
operators can always enjoy their own configuration.
MENU ACCESS
1 Press [MENU].
The Menu No. and setting appear on the main
dot-matrix display, and the explanation of the
menu appears on the sub dot-matrix display.
2 Press [A/B] to select Menu A or Menu B.
“A” or “B” appears, indicating which Menu is
selected.
3 Turn the MULTI/ CH control to select the desired
Menu No.
Each time you change the Menu No.,
a different scrolling message appears on the
sub dot-matrix display, describing the Menu
No.
You will see “PUSH SUB” if there are sub-
menus in the Menu No. Pressing [SUB] allows
you to select from among the sub-menus.
Press [MAIN] to exit the sub-menu selection.
4 Press [+], [–], Mic [UP]/ [DWN] to select a
parameter.
5 Press [MENU] to exit Menu mode.
QUICK MENU
Because the number of functions this transceiver
provides is extraordinary, there are numerous items in
each Menu. If you find accessing desired Menu Nos.
to be too time consuming, use the Quick Menu to
create your own customized, abbreviated Menu. You
can then add those Menu Nos. which you frequently
use, to the Quick Menu. Copying Menu Nos. to the
Quick Menu has no effect on the Menu.
PROGRAMMING THE QUICK MENU
1 Press [MENU].
2 Turn the MULTI/ CH control to select the desired
Menu No.
3 Press QUICK MEMO [M.IN].
A star appears, indicating that the Menu item
has been added to the Quick Menu.
To remove the item from the Quick Menu,
press QUICK MEMO [M.IN] again.
4 Press [MENU] to exit Menu mode.
Note: You cannot add a sub menu No. to the Quick Menu. Press
[MAIN] to go back to the main menu No., then press
QUICK MEMO [M.IN] to add the menu No. to the Quick Menu.
USING THE QUICK MENU
1 Press [MENU].
2 Press [1MHz/ SEL].
“MHz” appears.
3 Turn the MULTI/ CH control to select the desired
Quick Menu No.
4 Press [+], [–], Mic [UP]/ [DWN] to change the
current setting for the selected Menu No.
5 Press [MENU] to exit Quick Menu mode.
Note: If the Quick Menu has not been programmed, turning the
MULTI/ CH control in step 2 causes “CHECK” to be output in Morse
code.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TS-2000E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TS-2000E in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info