606708
40
Zoom out
Zoom in
Previous page
1/77
Next page
PACKET-2
DATA BAND
Select how data will be transmitted and received on your
transceiver.
1 Enter Menu mode and access Menu 930.
2 Set the data band to A-BAND (A band receives and
transmits), B-BAND (B band receives and transmits), TX:A-
BAND RX:B-BAND (A band transmits (
) and B band
receives (
)), or RX:A-BAND TX:B-BAND (A band receives
(
) and B band transmits ( )).
COM PORT SPEED
You can adjust the speed at which the computer and transceiver
exchange information, when the transceiver is connected to your
computer.
1 Enter Menu mode and access Menu 929.
2 Set the COM port speed to 9600, 19200, 38400, or 57600
bps.
Turning the power ON/OFF will change the port speed setting.
USING EXTERNAL TNC
External Data Band
1 Enter Menu mode and access Menu 918.
2 Set the data band to A-BAND (A band receives and
transmits), B-BAND (B band receives and transmits),
TX:A-BAND RX:B-BAND (A band transmits and B band
receives), or RX:A-BAND TX:B-BAND (A band receives
and B band transmits).
DATA Terminal Speed
Select 1200 or 9600 bps for the data transfer rate, depending
on TNC.
1200 bps: Transmit data input (PKD) sensitivity is 40 mV
p-p
,
and input impedance is 10 k.
9600 bps: Transmit data input (PKD) sensitivity is 2 V
p-p
,
and
input impedance is 10 k.
1 Enter Menu mode and access Menu 919.
2 Set the data speed to 1200 or 9600 bps.
SQC Output Setting
You can set the condition for which the SQC output terminal
becomes active.
1 Enter Menu mode and access Menu 921.
2 Set the SQC output activation method to one of the
following:
OFF: SQC output remains inactive.
BUSY: When a signal is received on the data band, the SQC
output becomes active.
SQL: While CTCSS/DCS is ON and a matching signal is
received, the SQC output becomes active. While CTCSS/
DCS is OFF, the SQC output becomes active when a busy
signal is received.
TX: While transmitting, the SQC output becomes active.
BUSY.TX: When the conditions of BUSY and TX (above) are
met, the SQC output becomes active.
SQL.TX: When the conditions of SQL and TX (above) are
met, the SQC output becomes active.
Note: The activation type (logic) can be changed using the MCP-6A
software ([Edit] - [Data Terminal] - [SQC Output Logic]).
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D710GE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D710GE in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D710GE

Kenwood TM-D710GE User Manual - English - 55 pages

Kenwood TM-D710GE User Manual - German - 74 pages

Kenwood TM-D710GE User Manual - Dutch - 75 pages

Kenwood TM-D710GE User Manual - Dutch - 55 pages

Kenwood TM-D710GE User Manual - French - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info