606708
31
Zoom out
Zoom in
Previous page
1/77
Next page
OTHER OP-4
TIME-OUT TIMER (TOT)
It is sometimes necessary or desirable to restrict a single
transmission to a specifi c maximum time. You may use this
function to prevent repeater time-outs when accessing repeaters,
or to conserve battery power.
When TOT times out (default is 10 minutes), the transceiver
generates beeps and automatically returns to receive mode. To
resume transmitting, release and then press the microphone
[PTT] again.
1 Enter Menu mode and access Menu 109.
2 Set the timer to 3, 5, or 10 minutes.
MICROPHONE SENSITIVITY
The input level to the microphone can be confi gured.
1 Enter Menu mode and access Menu 110.
2 Set the Microphone Sensitivity to HIGH, MEDIUM or LOW.
Note: The higher the input level to the microphone is confi gured, the easier to
gain the surrounded sounds.
POWER ON MESSAGE
Each time you switch the transceiver ON, “HELLO !!” (default: PM
OFF) appears on the display for approximately 2 seconds. You
can program your favorite message (for PM OFF, PM 1 ~ 5) in
place of the default message.
1 Enter Menu mode and access Menu 900.
2 Enter your desired message.
• Press [CLR] to clear the entire message, if necessary.
DISPLAY ILLUMINATION
You can manually change the display illumination to suit the
lighting conditions where you are operating.
1 Enter Menu mode and access Menu 901.
2 Set your desired brightness level from 1 to 8, or OFF.
Auto Display Brightness
When Auto Brightness is activated, the display will light up
every time a key is pressed.
1 Enter Menu mode and access Menu 902.
2 Set the Auto Brightness function to ON or OFF.
Backlight Color
You can manually change the display illumination to suit the
lighting conditions where you are operating.
1 Enter Menu mode and access Menu 903.
2 Set the backlight color to AMBER or GREEN.
Display Contrast
The display visibility changes depending on the ambient
conditions, for example between daytime and night. When
you fi nd the display is not clear, use this function to select the
optimum display contrast.
1 Enter Menu mode and access Menu 904.
2 Set your desired contrast level from 1 to16.
Note: The display contrast may be affected by a change in temperature. Adjust
the contrast as necessary.
Positive/ Negative Reversal
You can change the display status between Negative and
Positive (default).
1 Enter Menu mode and access Menu 905.
2 Set the backlight color to NEGATIVE or POSITIVE.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D710GE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D710GE in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D710GE

Kenwood TM-D710GE User Manual - English - 55 pages

Kenwood TM-D710GE User Manual - German - 74 pages

Kenwood TM-D710GE User Manual - Dutch - 75 pages

Kenwood TM-D710GE User Manual - Dutch - 55 pages

Kenwood TM-D710GE User Manual - French - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info