523408
81
Zoom out
Zoom in
Previous page
1/99
Next page
75
16
To change the transmit/ receive frequency:
([VFO] [ENTER] [0] ~ [9] (enter the necessary
digits) [ENTER]) or ([VFO] [UP]/ [DOWN])
To recall a memory channel:
([MR] [ENTER] [0] ~ [9] (enter the necessary
digits) [ENTER]) or ([MR] [UP]/ [DOWN])
To change the tone (or CTCSS) frequency:
([TONE SEL] [0] ~ [9] (enter 2 digits; ex. [0], [5])
[TONE SEL])
Use Nos. 01 to 38 shown in the table in page 30.
First activate the Tone or CTCSS function. You can select a
separate tone frequency for the Tone and CTCSS functions.
Note: When in Remote Control mode, you can perform only the following
operations on the mobile transceiver.
Transmit
Answer Back ON/ OFF
Secret Number Change
Partial/ Full Reset (with RESET button)
5 Select the receive frequency on band B (UHF).
Mate this frequency with the transmit frequency on the
handheld.
6 Select band A (VHF) as the TX band or Control band
{page 17}.
7 To cause the mobile to send a control acknowledgment
to the handheld, access Menu 1–A–2 (ANSWER
BACK) and select “ON”.
DTMF tones which represent the secret number will be
used as an acknowledgment.
8 Access Menu 1–A–3 (CONTROL) and select “ON”.
“REMOTE CON” and “LOCK” appear when the mobile
enters Remote Control mode.
CONTROL OPERATION
When in Remote Control mode, the DTMF keys of the
handheld will function as shown in the table. Each time
you press the desired key, the handheld will
automatically enter transmit mode and send the
corresponding command to the mobile.
Note: If using a handheld without a remote control function, manually
send “AXXX#YA#” where “XXX is a 3-digit secret number and “Y” is a
single-digit control command. If you do not add ”A#” to the end, you can
skip sending “AXXX#” next time; however, the mobile may be accidentally
controlled by other stations.
1NOVER 9RM
2NOENOT 0WOL
3NOSSCTC ARETNE
4FFOVER BLESENOT
5FFOENOT CNORETAEPER
6FFOSSCTC DFFORETAEPER
7LLAC NWOD
8OFV
#
PU
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D700E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D700E in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D700E

Kenwood TM-D700E User Manual - German - 55 pages

Kenwood TM-D700E User Manual - Dutch - 87 pages

Kenwood TM-D700E User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info