523408
62
Zoom out
Zoom in
Previous page
1/99
Next page
56
10
3 Press [SCAN] to activate the CTCSS Freq. ID.
“CT SCAN” appears and blinks.
Scan starts when signals are received.
To reverse the scan direction, turn the Tuning control
clockwise (upward scan) or counterclockwise
(downward scan). You can also press Mic [UP]/ [DWN].
To quit the function, press [ESC].
When the CTCSS frequency is identified, the identified
frequency appears and blinks.
4 Press [OK] to program the identified frequency in
place of the currently set CTCSS frequency.
The CTCSS function will be remained ON. You may
press [TONE] to switch the CTCSS function OFF.
Press [ESC] if you do not want to program the identified
frequency.
Press [SCAN] while the identified frequency is blinking,
to resume scanning.
Note: Received signals are audible while scanning is in progress.
If using a MC-53DM, you can also use its keypad to
select a CTCSS frequency. First program one of the Mic
PF keys as the ENTER key {page 62}. In step 3, press
[ENTER], then enter 01 to 38 shown in the table {page
30}. To select 79.7 Hz, for example, press [ENTER], [0],
[5].
Note:
You can select a separate tone frequency for the CTCSS and Tone
functions.
You cannot use the CTCSS with the Tone or DCS function.
If you select a high tone frequency, receiving audio or noise that
contains the same frequency portions may cause CTCSS to function
incorrectly. To prevent noise from causing this problem, select an
appropriate noise squelch level {page 20}.
CTCSS FREQ. ID
This function scans through all CTCSS frequencies to
identify the incoming CTCSS frequency on a received
signal. You may find it useful when you cannot recall the
CTCSS frequency that the other persons in your group
are using.
1 Press
[TONE] to switch ON the CTCSS function.
“CTCSS” appears when the CTCSS function is ON.
2 Press [F], [T.SEL].
The current CTCSS frequency appears and blinks.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-D700E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-D700E in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-D700E

Kenwood TM-D700E User Manual - German - 55 pages

Kenwood TM-D700E User Manual - Dutch - 87 pages

Kenwood TM-D700E User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info