606710
47
Zoom out
Zoom in
Previous page
1/81
Next page
40
8
NORMAL SCAN
When you are operating the transceiver in VFO Mode,
3 types of scanning are available: Band Scan, Program
Scan, and MHz Scan.
BAND SCAN
The transceiver scans the entire band of the frequency you
selected. For example, if you are operating and receiving
at 144.525 MHz, it scans all the frequencies available for
the VHF band. (Refer to receiver VFO frequency range
in the specifications {page 72}.) When the current VFO
receive frequency is outside the Program Scan frequency
range {below}, the transceiver scans the entire frequency
range available for the current VFO.
1
Press
[VFO]
and turn the
Tuning
control or press
Mic
[UP]
/
[DWN]
to select a frequency outside of the
Program Scan frequency range.
2
Press
[VFO] (1s)
to start Band Scan.
Scan starts from the current frequency.
The 1 MHz decimal blinks while scanning is in progress.
3
Press any key other than
[F]
or
[ ]
(Power) to stop
Band Scan.
Note:
The transceiver scans the frequency range that is stored in Menu
No. 7 (P.VFO) {page 61}.
If you select a frequency within the L0/U0 ~ L2/U2 range in step 2,
Program Scan starts.
PROGRAM SCAN
You can limit the scanning frequency range. There are
3 memory channel pairs (L0/U0 ~ L2/U2) available for
specifying the start and end frequencies. Program
Scan monitors the range between the start and end
frequencies that you have stored in these Memory
Channels. Before performing Program Scan, store the
Program Scan frequency range to one of the Memory
Channel pairs (L0/U0 ~ L2/U2).
Storing a Program Scan Frequency Range
1
Press
[VFO]
and turn the
Tuning
control or
press Mic
[UP]
/
[DWN]
to select your desired start
frequency.
2
Press
[F]
.
A Memory Channel number appears and blinks.
3
Turn the
Tuning
control or press Mic
[UP]
/
[DWN]
to select a Memory Channel from L0 ~ L2.
4
Press
[MR]
to store the start frequency in the
Memory Channel.
5
Turn the
Tuning
control to select your desired end
frequency.
6
Press
[F]
.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-281A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-281A in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-281A

Kenwood TM-281A User Manual - German - 81 pages

Kenwood TM-281A User Manual - Dutch - 81 pages

Kenwood TM-281A User Manual - French - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info