606710
34
Zoom out
Zoom in
Previous page
1/81
Next page
27
6
Note:
Pressing
[PTT]
causes the “ ” icon to quit blinking.
ASC can be activated while operating in Simplex Mode.
However, it does not change the Transmission/Reception
frequencies.
ASC does not function while scanning.
Activating ASC while using Reverse switches Reverse OFF.
If you recall a Memory Channel or the Call Channel that contains
a Reverse ON status, ASC is switched OFF.
ASC causes received audio to be momentarily intermitted every
3 seconds.
TONE FREQUENCY ID SCAN
This function scans through all tone frequencies to identify
the incoming tone frequency on a received signal. You
can use this function to determine which tone frequency is
required by accessing your local repeater.
1
Press
[F]
,
[MENU]
and turn the
Tuning
control to
select Menu No. 2 (T).
2
Press
[MENU] (1s)
to start the Tone Frequency ID
Scan.
When the transceiver receives a signal, scan starts.
The decimal point blinks during scan.
While the transceiver is receiving a signal during Tone
Frequency ID Scan, the signal is emitted from the
speaker.
To reverse the scan direction, turn the
Tuning
control.
To quit the function, press any key.
When the tone frequency is identified, a beep sounds and
the identified frequency blinks.
3
Press
[MENU]
to program the identified tone
frequency in place of the current tone frequency or
press any other key to exit the Tone Frequency ID
Scan.
• Turn the
Tuning
control while the identified tone
frequency is blinking to resume scanning.
4
Press any key other than
[MENU]
to exit Menu Mode.
Note:
Some repeaters do not re-transmit the access tone in the
download signal. In this case, check the other station’s uplink
signal to detect the repeater access tone.
The transceiver continues to check the Weather Alert Channel
and Priority Channel during Tone Frequency ID Scan.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-281A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-281A in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-281A

Kenwood TM-281A User Manual - German - 81 pages

Kenwood TM-281A User Manual - Dutch - 81 pages

Kenwood TM-281A User Manual - French - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info