606710
22
Zoom out
Zoom in
Previous page
1/81
Next page
15
4
TRANSMITTING
1
To transmit, hold the microphone approximately 5 cm
(2 inches) from your mouth, then press and hold Mic
[PTT]
and speak into the microphone in your normal
tone of voice.
• “ ” and the RF Power meter appears. The RF
Power meter shows the relative transmit output power
(
).
If you press Mic
[PTT]
while you are outside the
transmission coverage, a high pitched error beep sounds.
2
When you finish speaking, release Mic
[PTT]
.
Note:
If you continuously transmit for longer than the time specified
in Menu No. 21 (default is 10 minutes) {page 62}, the internal time-
out timer generates a warning beep and the transceiver stops
transmitting. In this case, release Mic
[PTT]
and let the transceiver
cool down for a while, then press Mic
[PTT]
again to resume
transmission.
SELECTING AN OUTPUT POWER
You can configure different power levels for transmission.
1
Press
[F]
,
[MENU]
and turn the
Tuning
control to
select Menu No. 6 (TXP).
2
Press
[MENU]
and turn the
Tuning
control to select “H”
(high; default) or “L” (low) power.
3
Press
[MENU]
to store the setting or any other key to
cancel.
4
Press any key other than
[MENU]
to exit Menu Mode.
Do not transmit at high output power for an extended period of
time. The transceiver could overheat and malfunction.
Continuous transmission causes the heat sink to overheat.
Never touch the heat sink when it may be hot.
Note:
When the transceiver overheats because of ambient high
temperature or continuous transmission, the protective circuit may
function to lower transmit output power.
SELECTING A FREQUENCY
VFO M
ODE
This is the basic mode for changing the operating
frequency. To enter VFO Mode, press
[VFO]
.
Turn the
Tuning
control clockwise to increase the
frequency and counterclockwise to decrease the
frequency, or use Mic
[UP]
/
[DWN]
.
Press and hold Mic
[UP]
/
[DWN]
to step the frequency
repeatedly.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TM-281A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TM-281A in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TM-281A

Kenwood TM-281A User Manual - German - 81 pages

Kenwood TM-281A User Manual - Dutch - 81 pages

Kenwood TM-281A User Manual - French - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info