683155
3
Zoom out
Zoom in
Previous page
1/20
Next page
2
REPEATER OPERATION
Note:
Please consult your dealer for programming the repeater.
After switching the power on, the CH/STATUS display blinks for
approximately 30 seconds, until the internal circuit stabilizes. Wait
until the display remains lit, before operating.
When power is applied to the unit, the POWER indicator lights:
・ Green when using the DC jack.
The BUSY indicator lights green while receiving a signal and the
TX indicator lights red while transmitting.
Rear Panel
a TX OUT jack
Connect a TX antenna or a duplexer to this receptacle.
b CONTROL I/O jack
Connect a repeater controller or a remote panel to this
DB-25 interface.
c REF IN jack
This jack is currently not used.
d RX IN jack
Connect an RX antenna or a duplexer to this BNC
receptacle.
CONTROLS AND FUNCTIONS
Front Panel
e FUSE
Insert 15 A blade fuse into this fuse holder.
f DC 13.2V jack
Connect a 13.2 V DC power supply to this jack.
g N SYNC 1 / 2 jack
This jack is currently not used. Future functions include
connecting another repeater or optional device.
h TEST/SPKR jack
Test input/output jack. Connect an external speaker to this
jack.
TRANSCEIVER OPERATION (Analog mode only)
Receive
Adjust the volume to your desired level. You may need to
readjust the volume if you are having interference while
receiving a message from your dispatcher or another member
in your eet.
The BUSY indicator lights green while a signal is being
received.
Transmit
1 Listen to the channel before transmitting, to make sure it is
not being used.
2 Press the microphone PTT switch, then speak in your
normal speaking voice.
The TX indicator lights red while transmitting.
3 When you nish speaking, release the PTT switch.
a Speaker
b CH/STATUS Display
Two 7-segment digits display the channel number, name,
or status.
c VOLUME control
Rotate to adjust the audio.
d POWER switch
e POWER indicator
Lights green when power is supplied to the DC 13.2V jack.
f MIC jack
Connect a microphone to this 8-pin modular jack.
g Programmable Function keys
Press these keys to activate their programmable functions.
h BUSY indicator
Lights green while a signal is being received.
i TX indicator
Lights red while transmitting.
abde
f
g
hi
c
CH/STATUS
VOLUME
BUSY
TX POWER
MIC
abde
fg
c
h
N SYNC
REFIN RX IN
TX OUT CONTROL
I/O
TEST/SPKR
DC 13.2V
FUSE 15A
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TKR-D810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TKR-D810 in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 0.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TKR-D810

Kenwood TKR-D810 User Manual - English - 4 pages

Kenwood TKR-D810 User Manual - German - 4 pages

Kenwood TKR-D810 User Manual - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info