511230
22
Zoom out
Zoom in
Previous page
1/33
Next page
16
STATUS MESSAGE
You can send and receive 2-digit Status messages which may be decided in your
talk group. Messages can contain up to 16 alphanumeric characters. Status
messages range from 10 to 99 (80 ~ 99 are reserved for special messages).
A maximum of 15 received messages can be stored in the Queue memory of
your transceiver. These saved messages can be reviewed after reception.
Depending on your dealer settings, when the Queue memory is full, either the
oldest message will be erased when a new message is received or the new
message will not be stored in the Queue memory. The icon lights when a
message is stored in the Queue memory.
TRANSMITTING
1 Select your desired zone and channel.
2 Press the key programmed as Status to enter Status Mode or Selcall +
Status to enter Selcall Mode.
When using the Status key to enter Status Mode, the station ID is fixed and
cannot be selected. Skip to step 5 to continue.
3 In Selcall Mode, press the <B and C> keys to select the ID of the station
you want to call.
If programmed by your dealer, you can also use the and keys.
Alternatively, you can enter a station ID using a DTMF keypad.
If Manual Input Mode is enabled, you can enter digits by using a DTMF keypad
or by selecting digits with the
and keys. To enter manual input mode, first
press and hold the S or DTMF
key. When using the and keys, cycle
through the digits to select a digit, then press the C> key to accept the digit and
shift the cursor to the right. Repeat this process until the entire ID is entered.
4 Press the S or DTMF key to enter Status Mode.
5 Press the <B and C> keys to select the status ID you want to transmit.
If programmed by your dealer, you can also use the and keys.
Alternatively, you can enter a station ID using a DTMF keypad.
If Manual Input Mode is enabled, you can enter digits by using a DTMF keypad
or by selecting digits with the
and keys. To enter manual input mode, first
press and hold the S or DTMF
key. When using the and keys, cycle
through the digits to select a digit, then press the C> key to accept the digit and
shift the cursor to the right. Repeat this process until the entire ID is entered.
6 Press the microphone PTT switch or key to initiate the Status call.
•“ ” is displayed when the call has been successfully transmitted.
RECEIVING
The icon will flash and a calling ID or text message will appear when a
Status call is received.
Press any key to return to Normal Operation Mode.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TK-8189 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TK-8189 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TK-8189

Kenwood TK-8189 User Manual - German - 32 pages

Kenwood TK-8189 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info