511228
16
Zoom out
Zoom in
Previous page
1/33
Next page
10
CONVENTIONAL SCAN
If the Scan function is programmed, Conventional zones or channels can be
scanned by pressing the key programmed as Scan. Scan can be used as either
Single Scan or Multi Scan.
Single Scan monitors only the channels of the currently selected zone, which have
been added to the scanning sequence. If set up to scan Priority channels, the Priority
channels will be scanned even if they are not within the currently selected zone.
Multi Scan monitors all channels of every zone, which have been added to the
scanning sequence.
To activate Scan, press the key programmed as Scan.
The icon and “ ” or the revert zone and channel number appear on the display.
The zone add indicator (
) will appear on the display when the selected
zone is added to the scan sequence. The channel add indicator (
) will
appear on the display when the selected channel is added to the scan sequence.
When a call is received, scanning stops and the zone and channel digits appear.
Press the microphone PTT switch and speak into the microphone to respond to the
call. The transceiver will continue scanning after a predetermined time delay if the
PTT switch is released and no further signal is received.
To stop scanning, press the Scan key again.
ADD TO SCAN/ DELETE FROM SCAN
Press the key programmed as Scan Delete/Add to add or remove each channel
to or from the scan sequence.
The channel add indicator ( ) will appear on the display when the
selected channel is added to the scan sequence.
Press the key programmed as Zone Delete/Add to add or remove each zone to
or from the scan sequence.
The zone add indicator ( ) will appear on the display when the selected
zone is added to the scan sequence.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TK-8180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TK-8180 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TK-8180

Kenwood TK-8180 User Manual - German - 32 pages

Kenwood TK-8180 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info