511229
15
Zoom out
Zoom in
Previous page
1/33
Next page
9
SELECTING A ZONE AND CHANNEL
Select the desired zone using the keys programmed as Zone Up and Zone
Down.
Select the desired channel using the keys programmed as CH/GID (Channel/
Group ID) Up and CH/GID (Channel/ Group ID) Down.
Names can be programmed for zones and channels with up to 12 characters
each. However, to fit on the display, names will be abbreviated. Your dealer can
set the zone name to a length of 0 to 12 digits. Channel names will shorten
appropriately, to fit in the 12-digit display.
For example, if the channel name is “–CHANNEL1–” and the zone name is
“KENWOOD”, and your dealer sets the zone name to 3-digits, the following
display will appear:
TRANSMITTING
1 Select the desired zone and channel using the Zone and CH/GID keys.
In Voting, Voting with Signaling, and Free Channel Call zones, the channel is
selected automatically.
2 In Conventional zones, press the key programmed as Monitor or Squelch
Off to check whether or not the channel is free.
If the channel is busy, wait until it becomes free.
3 Press microphone PTT switch and speak into the microphone. Release the
PTT switch to receive.
For best sound quality at the receiving station, hold the microphone approximately
1.5 inches (3 ~ 4 cm) from your mouth.
In Voting and Voting with Signaling zones, the transceiver will search for the
closest repeater and transmit using that repeater’s frequency.
In Free Channel Call zones, the transceiver will search for a free channel and will
begin transmitting on that channel.
RECEIVING
1 Select the desired zone and channel using the Zone and CH/GID keys.
Alternatively, in Conventional zones, you can activate the Scan function if desired.
In Voting and Voting with Signaling zones, the transceiver will automatically search
for the strongest signal and receive on that frequency.
In Free Channel Call zones, the transceiver will automatically search for any signal
and will receive on that channel.
2 When you hear a callers voice, readjust the volume as necessary.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TK-7189 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TK-7189 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TK-7189

Kenwood TK-7189 User Manual - German - 32 pages

Kenwood TK-7189 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info