606468
20
Zoom out
Zoom in
Previous page
1/31
Next page
12
CHANNEL OPERATING FREQUENCIES
To change the operating frequency of a channel:
1 Select your desired channel using the Channel selector.
2 With the transceiver power OFF, press and hold the PTT
switch while turning the transceiver power ON.
Continue to hold the PTT switch until the LED lights orange
(approximately 2 seconds).
3 Release the PTT switch.
The transceiver emits a morse code of the current channel
setting. Refer to the table below for the morse code output.
4 Press the Side key to change the Channel Setup number, to
select the new channel frequency.
Channel Setup numbers and their corresponding operating
frequencies are provided in the table. {p.13}
To set the 0 (OFF), press the Side Key for more than 2 seconds.
After 1 second, the transceiver will emit a morse code of the
current Channel Setup setting.
5 Press the PTT switch to save the setting.
The LED will blink red and a beep will sound.
The transceiver will automatically return to normal operation
when no action is performed for approximately 6 seconds.
Setting
Number
Morse Code Setting Number Morse Code
0 5 • • • • •
1 • — 6 — • • • •
2 • • — 7 — • • •
3 • • • — 8 — • •
4 • • • • — 9 — •
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TK-3501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TK-3501 in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TK-3501

Kenwood TK-3501 User Manual - English, German - 2 pages

Kenwood TK-3501 User Manual - German - 31 pages

Kenwood TK-3501 User Manual - Dutch - 2 pages

Kenwood TK-3501 User Manual - Dutch - 31 pages

Kenwood TK-3501 User Manual - French - 2 pages

Kenwood TK-3501 User Manual - French - 31 pages

Kenwood TK-3501 User Manual - Italian, Turkish, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info