Manual Kenwood TK-3230 ProTalk XLS (page 51 of 66) (English)

606429

Zoom out

Zoom in

1/66

key while turning the transceiver power ON (for 1 second).

2 Press the or key to select “ ”.

3 Press the MENU key then press or to select “ ”

(3 minutes) or “

” (10 minutes).

4 Press the MENU key to exit the selection.

5 Press the PTT, MON, or CAL key to exit Setting Mode.

This transceiver is also equipped with a pre-alert tone which

sounds 10 seconds before the Time-out Timer expires.

This will allow you time to finish your message before the

transceiver automatically stops transmitting.

BAttery SAver

This transceiver has been designed to give you the most out of

your battery power. The battery saver function decreases the

amount of power used when a signal is not being received and

no operations are being performed.

While using the transceiver, battery saver will automatically

switch ON after 5 seconds have elapsed with no operations or

received calls. Operating the transceiver or receiving a call will

switch this feature OFF until 5 seconds of non-operation occurs

again.

To turn this function on or off:

1 With the transceiver power OFF, press and hold the MENU

key while turning the transceiver power ON (for 1 second).

2 Press the or key to select “ ”.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TK-3230 ProTalk XLS in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood TK-3230 ProTalk XLS Manual

Product: