606696
52
Zoom out
Zoom in
Previous page
1/68
Next page
44
FREQUENCY STEP SIZE
Choosing the correct frequency step size is essential in order to select your exact
receive frequency using the ENC control. You can select your desired frequency
step size from: 5, 6.25, 10, 12.5, 15, 20, 25, 30, 50, or 100 (kHz).
To change the frequency step size:
1 Press [STEP].
The current frequency step size appears.
2 Rotate the ENC control to select your desired frequency step size.
3 Press any key other than [MONI], [LAMP], or [PTT] to set the selected
frequency step size.
Note: If you change to a frequency step size that does not match the current operating frequency,
the transceiver automatically adjusts the frequency to match the new frequency step size.
TONE ALERT
Tone Alert provides an audible alarm when signals are received on the frequency
you are monitoring. In addition, it shows the number of hours and minutes
elapsed after signals have been received. If you use Tone Alert with CTCSS
or DCS, it sounds only when a received CTCSS tone or DCS code matches the
tone or code you selected. Turning this function ON is convenient for when you
are not sitting in front of the transceiver, as confirmation of the receipt is possible
while away from the transceiver.
1 Select your desired frequency or memory channel.
2 Press [ ].
The OFF/ ON setting appears on the display.
When Tone Alert is set to ON, the “ ” icon appears on the display.
When the signal is received for more than 1 second, an alarm sounds, the “
icon blinks and the elapsed time appears on the display.
Press [PTT] while the “ ” icon is blinking to turn the Tone Alert function OFF.
When 9 hours and 59 minutes pass after a signal has been received, counting
stops.
Each time a new signal is received, the elapsed time resets to 0:00.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TH-K40A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TH-K40A in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TH-K40A

Kenwood TH-K40A User Manual - German - 68 pages

Kenwood TH-K40A User Manual - Dutch - 68 pages

Kenwood TH-K40A User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info