511233
55
Zoom out
Zoom in
Previous page
1/64
Next page
50
15 TROUBLESHOOTING
MICROPROCESSOR RESET
If your transceiver seems to be malfunctioning,
resetting the microprocessor may solve the problem.
The following 3 reset modes are available. When
performing the reset, you may lose memory data and
stored information. Back up or write down important
data before performing the reset.
INITIAL SETTINGS
For each VFO, the factory defaults for the operating
frequency and mode are as follows.
A-band: 144.000 MHz/ FM
B-band: 440.000 MHz/ FM (TH-F6A)
B-band: 430.000 MHz/ FM (TH-F7E)
The Memory channels have no data stored. Refer to
pages 19 and 20 for the Call Channels and
Information Channels default values.
VFO RESET
This resets the transceiver parameters excluding the
Menu contents and Memory channel contents.
Note: Menu No. 4 (PROG VFO) and No. 6 (OFFSET) return to the
factory default values.
MENU RESET
This resets the parameters only in the Menu items to
factory default values.
FULL RESET
This resets all transceiver parameters to the factory
default values.
PERFORMING RESET
There are 2 ways to enter the reset mode selection.
However, the transceiver must be configured to the
Lock function OFF {page 38}.
When the transceiver is turned OFF:
1 Press [F]+[ ] (POWER).
All indicators are lit.
2 Release [F].
Proceed to step 3 {below}.
From the Menu:
1 Press [MNU].
2 Turn the Tuning control or press [ ]/ [ ] to select
Menu No. 31 (RESET?). Press [ ] or [MNU].
3 Select the reset mode by turning the Tuning
control or press [ ]/ [ ]. If you select “NO”, the
transceiver exits the reset mode.
4 Press [ ] or [MNU] to proceed.
If you press any keys, other than [LAMP] and
[MONI], the transceiver exits the reset mode.
A reset confirmation message appears.
5 Press [ ] or [MNU] to reset the transceiver.
If you press any keys, other than [LAMP] and
[MONI], the transceiver exits the reset mode.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TH-F7E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TH-F7E in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TH-F7E

Kenwood TH-F7E User Manual - Dutch - 64 pages

Kenwood TH-F7E User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info