511233
48
Zoom out
Zoom in
Previous page
1/64
Next page
43
WIRELESS REMOTE CONTROL (TH-F6A ONLY)
If you also have a KENWOOD multi-band mobile
transceiver, you can control one of its bands by
sending DTMF tones from this portable transceiver.
You will find this function useful when you want to
control your mobile transceiver from a location
outside your vehicle.
Note:
You can remotely control only mobile transceivers that have both
the DTSS and Remote Control functions.
The FCC rules permit you to send control codes only on the
70 cm band.
PREPARATION
Let us assume the 2 m band of the mobile transceiver
will be controlled.
On the portable transceiver:
1 Press [PTT]+[VFO]+[ ] (POWER).
The current secret access code number
appears. The default is 000.
2 Press a numeric key (0 to 9) to enter a 3-digit
secret number.
You can also turn the Tuning control or press
[ ]/ [ ] to select each digit. Press [ ] (or [ ])
to move the cursor to the next (or previous)
digit.
3 When the cursor is at the right most position,
press [ ] to complete the setting.
4 Press [BAND] to select the 70 cm band.
5 Turn the Tuning control to select the transmit
frequency.
6 Turn a transceiver power OFF.
7 Press [PTT]+[MR]+[ ] (POWER).
The transceiver enters Remote Control mode.
“MOBILE CTRL” appears.
To exit Remote Control mode, repeat steps 6
and 7.
On the mobile transceiver:
8 Program the DTSS code on the 70 cm band as the
secret number.
Select the same number as you selected in
step 2.
For the programming method, refer to the
instruction manual of the mobile transceiver.
9 Select the receive frequency on the 70 cm band.
Mate this frequency with the transmit frequency
on the portable transceiver.
10 Make the transceiver enter Remote Control mode.
For the method, refer to the instruction manual
of the mobile transceiver.
CONTROL OPERATION
When in the Remote Control mode, the keys of the
transceiver will function as below. Each time you
press a key, the transceiver will automatically enter
transmit mode and send the corresponding command
to the mobile transceiver.
1 2 3 A
NOVER
1
NOENOTNOSSCTCTNE
4 5 6 B
FFOVER
1
FFOENOTFFOSSCTCLESENOT
7 8 9 C
LLACOFVRM)NOPER(
2
0 # D
NWODWOLPU)FFOPER(
2
1
TM-V7A/ TM-D700A:REV ON/ OFF
TS-2000/ TS-B2000: DCS ON/ OFF
Other mobile transceiver: TONE ALERT ON/ OFF
2
Switches Repeater function ON/ OFF if the mobile
transceiver supports this function.
To change the transmit/ receive frequency:
[VFO] [ENT] [0] ~ [9] (enter the necessary
digits) [ENT]
Or
[VFO] [UP]/ [DOWN]
To recall a memory channel:
[MR] [ENT] [0] ~ [9] (enter the necessary digits)
[ENT]
Or
[MR] [UP]/ [DOWN]
To change the tone (or CTCSS) frequency:
[TONE SEL] [0] ~ [9] (enter 2 digits; ex. [0], [5])
[TONE SEL]
Refer to the Tone frequency table on your mobile
transceiver for the Tone number.
Your mobile transceiver may require you to first
activate the Tone or CTCSS function. It may also
allow you to program a separate tone and CTCSS
frequency. Refer to the instruction manual of the
mobile transceiver.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TH-F7E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TH-F7E in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TH-F7E

Kenwood TH-F7E User Manual - Dutch - 64 pages

Kenwood TH-F7E User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info