511233
36
Zoom out
Zoom in
Previous page
1/64
Next page
31
DTMF FUNCTIONS
The keys on the keypad also function as DTMF keys;
the 12 keys found on a touch-tone phone plus
4 additional keys (A, B, C, D). This transceiver also
provides 10 dedicated DTMF memory channels. You
can store a DTMF number (16 digits max.) with a
memory name (8 digits max.) in each of the channels
to recall later for speed dialing.
Many repeaters in the U.S.A. and Canada offer a
service called Autopatch. You can access the public
telephone network via such a repeater by sending
DTMF tones. For further information, consult your
local repeater reference.
MANUAL DIALING
Manual Dialing requires only two steps to send DTMF
tones.
1 Press and hold the PTT switch to transmit.
2 While transmitting, press the keys in sequence on
the keypad to send DTMF tones.
The corresponding DTMF tones are
transmitted and monitored through the speaker.
While pressing keys on the keypad, the
transceiver remains in the TX mode. You do
not have to press [PTT] at the same time.
.qerF
)zH(
9021 6331 7741 3361
796
123A
077
456B
258
789C
149
0#D
DTMF TX HOLD
This function causes the transceiver to remain in
transmit mode for 2 seconds after you release each
key. So, you can release the PTT switch while
sending the DTMF tones.
1 Press [MNU] to enter Menu mode.
2 Turn the Tuning control or press [ ]/ [ ] to select
Menu No. 12 (DTMF HOLD).
3 Press [ ] or [MNU].
4 Turn the Tuning control or press [ ]/ [ ] to select
“ON”.
5 Press [ ] or [MNU] to store the setting.
Otherwise, press [ ] or [PTT] to cancel.
AUTOMATIC DIALER
If you use the 10 dedicated memory channels to store
DTMF numbers, you need not remember a long string
of digits.
STORING A DTMF NUMBER IN MEMORY
Note: Audible DTMF tones from other transceivers near you (or from
your own speaker) may be picked up by your microphone. If so, you
may fail to correctly program a DTMF number.
1 Press [MNU] to enter Menu mode.
2 Turn the Tuning control or press [ ]/ [ ] to select
Menu No. 10 (DTMF STORE).
3 Press [ ] or [MNU].
4 Turn the Tuning control or press [ ]/ [ ] to select
your desired DTMF memory channel number from
0 to 9.
5 Press [ ] or [MNU].
The display for entering a memory name
appears; the first digit blinks.
To skip naming the channel, press [ ] or
[MNU] again; jump to step 9.
6 Turn the Tuning control or press [ ]/ [ ] to select
a character. Refer to “NAMING A MEMORY
CHANNEL” {page 17} for the available characters
and the input method.
You can enter alphanumeric characters plus
special ASCII characters.
Press [MONI] to delete the charactor at the
cursor.
You can also use the numeric keypad to enter
a character (special ASCII characters are not
available). For example, each press of [2]
switches entry as a, b, c, 2, A, B, C and then
back to a.
While pressing and holding [LAMP], turn the
Tuning control to jump to the first character of
each ASCII character group {page 17}.
7 Press [ ] to move the cursor to the next digit.
8 Repeat steps 6 and 7 to enter up to 8 digits.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TH-F7E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TH-F7E in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TH-F7E

Kenwood TH-F7E User Manual - Dutch - 64 pages

Kenwood TH-F7E User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info