511233

Kenwood TH-F7E Manual

23
Zoom out
Zoom in
Previous page
1/64
Next page
18
6 MEMORY CHANNELS
MEMORY CHANNEL GROUPS
400 memory channels have been divided into
8 groups of 50. Group 0 contains memory channel
numbers 0 ~ 49, group 1 is 50 ~ 99, group 2 is 100 ~
149, and so on. You can categorize each group to
store similar data, same frequency bands or same
modes for ease of use.
#puorG lennahCyromeM #puorG lennahCyromeM
0puorG94~04puorG942~002
1puorG99~055puorG992~052
2puorG941~0016puorG943~003
3puorG991~0517puorG993~053
RECALLING A MEMORY CHANNEL USING
MEMORY GROUP FUNCTION
It is sometimes a tedious endeavor to scroll through
400 memory channels sequentially. However, using a
Group memory recall function, you can access your
desired memory channel numbers more quickly.
1 Press [MR] to enter Memory Recall mode.
2 While pressing and holding [LAMP], turn the
Tuning control to select a group.
• Each click of the Tuning control, the lowest
memory channel number of each group is
recalled. For example, if you have the following
memory channels that contain data:
#puorG ataDniatnoCtahtslennahCyromeM
0puorG0201510354
1puorG0516568789
2puorG301111321
3puorG251661
4puorG
5puorG062082
6puorG503223333543
7puorG993
Memory channels 0, 50, 103, 152, 260, 305, 399,
and then 0 are recalled sequentially while pressing
and holding [LAMP].
3 Release [LAMP] and turn the Tuning control to
select the desired memory channels within the
selected group.
Note: If you have configured Menu No. 3 (MR METHOD) as
“CURRENT BAND” {page 16}, only memory channels that have the
same frequency band data are recalled.
ERASING MEMORY CHANNELS USING MEMORY
GROUP DELETE FUNCTION
Instead of erasing each unnecessary channel one by
one, you can erase an entire group of memory
channels at once. For example, if you erase group 2
memory channels, all the data in memory channels
100 ~ 149 are erased.
1 Press [MR].
• Turn the Tuning control or press [ ]/ [ ] to
select a memory channel in the group you want
to erase (for example, memory channel
No. 111, in Group 2).
2 Press [ ] (POWER) to turn the transceiver OFF.
3 Press [MHz]+[ ] (POWER).
• An erase confirmation message appears.
4 Press [MR] ([ ] or [MNU]) to proceed.
Otherwise, press any other key to cancel the
erase.
MEMORY CHANNEL TRANSFER
MEMORY \ VFO TRANSFER
After retrieving frequencies and associated data from
Memory Recall mode, you can copy the data to the
VFO. This function is useful, for example, when the
frequency you want to monitor is near the frequency
stored in a memory channel.
1 Press [MR], then turn the Tuning control to recall
a desired memory channel.
2 Press [F], [VFO] to copy the memory channel
data to the VFO.
Note:
◆
To copy an odd-split channel data {page 15}, turn the Reverse
function ON {page 14} before performing the transfer.
◆
You can also transfer the Program Scan memory channels
(L0/U0 ~ L9/U9), Priority Channels (Pr1 and Pr2), and
Information Channels (I–0 ~ I–9) to the VFO.
CHANNEL \ CHANNEL TRANSFER
You can also copy channel information from one
memory channel to another. This function is useful
when storing frequencies and associated data that
you temporarily change in Memory Recall mode.
1 Press [MR], then turn the Tuning control to recall
a desired memory channel.
2 Press [F].
3 Select the memory channel where you would like
the data copied, using the Tuning control.
4 Press [MR] ([ ] or [MNU]).
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TH-F7E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TH-F7E in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TH-F7E

Kenwood TH-F7E User Manual - Dutch - 64 pages

Kenwood TH-F7E User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info