696175
91
Zoom out
Zoom in
Previous page
1/129
Next page
16-9
DISPLAYING THE REPEATER DETAILS
Youcancheckthedetailsinformationoftherepeater.
1 Select[RepeaterDetail]intheDigitalFunctionMenu.
The confirmation screen appears.
2 Press [ ]/[ ].
Each press switches between the access repeater details
screenandgatewayCQrepeaterdetailsscreen.
FAST DATA COMMUNICATION
Fast data communications can be performed by using the
voicebandfordatacommunicationswhenoperatinginDV/
DR mode.
1 AccessMenuNo.984.
Select the method for connecting (USB or Bluetooth) with
the external device for data communication.
2 Select[DataMode]intheDigitalFunctionMenu.
Whenthedatamodeisset,the< >iconappears
on the display.
Connecting with a PC
Use a commercially available data communication cable to
connecttheMicro-USBconnectorofthetransceivertoaPC.
Software Setting for Data Communication
Refer to the followings and complete the settings.
Port:SelecttheCOMportnumberusedbythistransceiver.
Note:
TheCOMportnumberusedbythistransceivermaybe5or
higherdependingonthePCenvironment.Inthiscase,usea
communicationsoftwarethatallowsyoutosettheCOMport
number to 5 or higher.
Data Communication Operation
Whenperformingdatacommunicationoperation,refertothe
instruction manual of the communication software.
1 SettheCallsignofyourstation,theotherstation,and
repeater.
2 Perform the operation according to the instruction manual
and other documents of the communication software.
3 Whenatextisenteredinthecommunicationsoftware
screen, that text will be transmitted automatically.
Data TX End Timing
This function is to set the delay time until return from fast
dataTXtoRXinaccordancewiththeTXtimingofthePC
software.
1 AccessMenuNo.614.
2 Select[Off],[0.5],[1],[1.5],or[2]seconds.
EMR COMMUNICATION
The Enhanced Monitor Request (EMR) mode is a function
usedinDV/DRmodeto,forexample,contactsomebodyinan
emergency.
Note:
This function is forced to open the squelch of all of the
transceivers, which have received the EMR signal, and then to
the state to receive the signal. And easily send the EMR signal,
please note that you will cause to give trouble to the other
station.
SettingtheotherstationCallsignorCQaremaintained.
Selecting EMR in EMR mode will cancel EMR mode.
EMRsettingiscanceledwhenthepowerisswitchedOFF.
EMRcommunicationisnotrecordedintheTXhistory.
Any station that received the EMR communication displays the
EMRcallicon< >duringreceiving.
1 Select[DestinationSelect]intheDigitalFunctionMenu.
The destination selection screen appears.
2 Select[EMR]andpress [ENT].
[EMR]isset.
3 Press [PTT] to transmit.
Adjusting the Volume for EMR Signal Reception
Youcansetthevolumelevelwithintherangeof1to50when
an EMR signal is received. However, if the volume level set
by the [VOL] control is higher, the reception will be at that
volume.
1 AccessMenuNo.615.
2 Selectthevolumelevelamongfrom[1]to[50],andpress
[A/B].
3 The volume is set.
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TH-D74A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TH-D74A in the language / languages: English as an attachment in your email.

The manual is 6.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TH-D74A

Kenwood TH-D74A User Manual - German, Dutch, Italian - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info