606703
21
Zoom out
Zoom in
Previous page
1/75
Next page
CTCSS/ DCS/ CROSS TONE – 3
DCS-CODESUCHLAUF
Diese Funktion sucht alle DCS-Codes ab, um den DCS-
Eingangscode eines empfangenen Signals zu bestimmen.
Sie können die Funktion z. B. einsetzen, wenn Sie nicht mehr
wissen, welchen DCS-Code die anderen Mitglieder Ihrer Gruppe
verwenden.
1 Drücken Sie [TONE] 3 Mal, um die DCS-Funktion zu
aktivieren.
Wenn DCS eingeschaltet ist, sehen Sie im Display das
Symbol „
”.
• Drücken Sie [TONE] wiederholt, um durch diese Optionen zu
schalten:
Ton (
) CTCSS ( ) DCS ( ) Kreuzton
(
: Standard) AUS (keine Anzeige).
<Wenn APRS eingeschaltet und „Sprachsignal“ konfi guriert
ist, kommt oben außerdem „Sprachsignal EIN“ hinzu. >
2 Drücken Sie [F], [TONE] (1 s).
Der Suchlauf wird gestartet, und im Display blinkt „Scanning“.
Um den Suchlauf zu beenden, drücken Sie [ESC ].
Wenn der DCS-Code bestimmt ist, wird der gefundene Code
im Display angezeigt und blinkt.
3 Drücken Sie [ OK] um den gefundenen Codes anstelle des
aktuellen DCS-Codes zu übernehmen.
Die DCS-Funktion bleibt eingeschaltet. Um DCS
auszuschalten, drücken Sie [TONE], bis „DCS“ nicht mehr
angezeigt wird.
• Drücken Sie [ESC
], wenn Sie den gefundenen Code nicht
programmieren wollen.
KREUZTON
AKTIVIEREN VON KREUZTON
Sie können für den Zugriff auf einen Repeater, der mit
unterschiedlichen Signalen verschlüsselt und entschlüsselt, für
TX und RX getrennte Signalarten festlegen.
So schalten Sie die Kreuzton-Funktion ein:
Drücken Sie [TONE] 4 Mal, um die Kreuzton-Funktion zu
aktivieren.
Bei eingeschalteter Kreuzton-Funktion sehen Sie im Display das
Symbol „
“ (Standard).
• Drücken Sie [TONE] wiederholt, um durch diese Optionen zu
schalten:
Ton (
) CTCSS ( ) DCS ( ) Kreuzton
(
: Standard) AUS (keine Anzeige).
<Wenn APRS eingeschaltet und „Sprachsignal“ konfi guriert ist,
kommt oben außerdem „Sprachsignal EIN“ hinzu. >
Auswählen eines Kreuzton-Modus
So wählen Sie einen Kreuzton bzw. eine Codefrequenz für
die Verbindung mit dem gewünschten Repeater aus:
1 Schalten Sie die Kreuzton-Funktion ein.
2 Drücken Sie [F], [TONE].
The Cross Tone setting appears on the display.
3 Drücken Sie [ ]/[ ], oder drehen Sie den Tuning-
Regler, um die gewünschte Kreuzton-Einstellung
auszuwählen
Einstellung
Verschlüsseln Entschlüsseln
Symbol
DCS/Off DCS Aus
TONE/DCS Ton DCS
DCS/CTCSS DCS CTCSS
TONE/CTCSS Ton CTCSS
Um keine Kreuzton-Einstellung auszuwählen, drücken
Sie [ESC
].
4 Drücken Sie [ OK], um die gewählte Einstellung zu
speichern.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood TH-D72A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood TH-D72A in the language / languages: German as an attachment in your email.

The manual is 7,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood TH-D72A

Kenwood TH-D72A User Manual - English - 156 pages

Kenwood TH-D72A User Manual - English - 75 pages

Kenwood TH-D72A User Manual - German, Dutch - 156 pages

Kenwood TH-D72A User Manual - Dutch - 73 pages

Kenwood TH-D72A User Manual - French - 156 pages

Kenwood TH-D72A User Manual - French - 76 pages

Kenwood TH-D72A User Manual - Italian - 156 pages

Kenwood TH-D72A User Manual - Spanish - 156 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info