Manual Kenwood SJM150 series (page 3 of 77) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

510864

Zoom out

Zoom in

1/77

key

ቢ spout

ባ finger pad

ቤ flip top lid

ብ lid release button

ቦ water level windows

ቧ on/off switch with indicator light

ቨ 360° powerbase

ቩ cord wrap

ቪ filter

ቫ

a clips

b compartment

c central divider

d bypass

to use your kettle

1 Fill the kettle through either the

spout or lid. To open the lid, press

the lid release button. The water

level must be between ‘MAX’ and

1 cup (200-250mls).

●

Be economical: do not boil more

water than you need.

●

To improve the quality of your drinks

always use fresh water.

●

Empty the kettle after each use.

2 Check the lid is closed. Close the lid

by pushing down on the finger pad

area ባ.

3 Plug in and switch on. The indicator

light will come on.

4 Your kettle will boil and switch off

automatically. To re-boil, wait a few

seconds - the on/off switch needs

time to reset.

●

If you experience problems

with your kettle switching on

and off during use or

switching off before boiling,

check that the flat element is

free from scale - see

“descaling”.

●

Your kettle is fitted with a filter to

hold back limescale particles.

●

If you find drops of water under your

kettle, don’t worry - it is just

condensation.

boil-dry protection

●

If you switch on with too little water,

your kettle will cut out automatically.

Switch off, remove from the

powerbase and let it cool down

before re-filling. When it has cooled

down, the switch will reset itself.

using the kettle with the

1 Ensure the ᕡ is clipped

into place correctly.

2 Pour the water into the

compartment ᕣ until level with the

top of the central divider ᕤ for a 1

cup measure. Adjust your fill rate to

match your required cup measure.

●

If the is fitted and you wish

to measure more than 1 or 2 cups,

pour the water directly into the

bypass opening ᕥ.

care and cleaning

●

Before cleaning, unplug your kettle

and let it cool down.

the outside and powerbase

●

Wipe with a damp cloth, then dry.

Do not use abrasives - they will

scratch the metal and plastic

surfaces.

the inside

●

Even though your kettle comes with

a filter, you still need to clean the

inside (and the filter) regularly.

●

Lift the out using the central

divider ᕢ.

●

Wash in warm soapy water, dry and

refit by clipping back into position.

the filter

1 Open the lid.

2 Slide the filter out ቪ.

3 either rinse under the tap or use a

soft brush.

or when descaling your kettle, drop

the filter in too. Rinse thoroughly.

4 Slide the filter back in to refit.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood SJM150 series in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood SJM150 series Manual

Product: