73466
4
Zoom out
Zoom in
Previous page
1/9
Next page
i
mportant
Never blend dry ingredients (eg
s
pices, nuts) or run the Smoothie
B
lender empty.
Don’t use the blender as a storage
c
ontainer. Keep it empty before and
a
fter use.
Some liquids increase in volume and
f
roth during blending eg milk, so do
n
ot overfill and ensure the lid is
correctly fitted.
To ensure long life of your Smoothie
Blender, never run it continuously for
longer than 60 seconds.
Never blend food that has formed a
solid mass during freezing, break it
up before adding to the goblet.
care and cleaning
Always switch off, unplug and
dismantle before cleaning.
Never let the power unit, cord or
plug get wet.
Empty the goblet before unscrewing
it from the blade unit.
Always wash immediately after use.
Don’t let food dry onto the goblet
assembly as this will make cleaning
difficult.
Don’t wash any part in the
dishwasher.
Regularly dismantle the tap and
clean the parts thoroughly.
blender unit
Before dismantling the blender, half
fill the goblet with warm water. Fit
the lid and cap then place on the
power unit. Switch to MIX and whilst
running open the tap and allow the
water to drain into a container to
clean the valve. This can be
repeated until the water runs clear. If
further cleaning is necessary
dismantle the unit first.
power unit
Wipe with a damp cloth, then dry.
b
lade unit
1 Remove and wash the sealing ring.
2
Don’t touch the sharp blades - brush
t
hem clean using hot soapy water,
then rinse thoroughly under the tap.
D
on’t immerse the blade assembly in
w
ater.
3 Leave to dry upside down away from
c
hildren.
lid, cap, stirrer
Wash by hand, rinse with clean
water then dry.
cleaning the tap
Remove the tap assembly from the
goblet, then soak the tap in hot
soapy water with the valve open .
Wash thoroughly then rinse and dry.
Wash and dry the goblet then refit
the tap ensuring that the seals are
correctly positioned on the goblet .
dismantling the tap
1 Hold the tap by the lever. Push up
on the plug whilst sliding the lever
in the direction indicated .
2 Unscrew the cap .
3 Remove the spring .
4 Push up on the plug on the inside of
the tap and at the same time pull
the plug from above .
5 Wash all the components, then dry
thoroughly.
6 Reassemble the unit by reversing the
above procedure.
4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood SB 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood SB 250 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info